For those that tested 6.1 in a Linux environment I'm looking for any problems you had. During my testing on AIX and Windows I had failures during the installation which were always DB2 related. I'm getting ready to bring up TSM on a Linux box and am looking for your experience. This is a new installation not an upgrade. This is a test but I really want to get a working environment up as quickly and easily as possible. In the end I will blow this away and bring it up on an IBM p series box running Linux which will hopefully be just as easy but for now this is just a test on a blade I was given till the other hardware arrives.
I will direct 2 LTO2 drives to this box from the 3584 along with a VTL that is coming in this week. Learning Linux from scratch so I really have no idea how these devices are even found. I have SAN disk displayed for DB and I need to figure out how to get all that set up too, unfortunately it's not something I've figured out. I can tap some other Linux resources here for help with that I hope. I'm taking notes on what I've done with specific commands since I certainly won't remember it tomorrow. I really hate asking for documents others have put together but in this case, since I'm being pressured to get this going, I certainly would appreciate anything others have put together if anyone may have something already. Thanks for any info you can provide. Geoff Gill TSM Administrator PeopleSoft Sr. Systems Administrator SAIC M/S-B1P (858)826-4062 (office) (858)412-9883 (blackberry) Email: geoffrey.l.g...@saic.com
