Hi, I normally don't use the ISC or WebGUI to define any drives or libraries. But you need to define the path between.
Another thing I see is that the Serial number that you specify on both strings is different. Try to use the command line instead of the GUI, >define libr LIBLT01 libtype=SCSI >define path TSMSERVER liblt01 srct=server destt=libr device=/dev/XXXXX >define dr liblt0 DRIVE0 >define path TSMSERVER drive0 srct=server destt=dr libr=liblt01 device=/dev/XXXX >define dr liblt0 DRIVE1 >define path TSMSERVER drive1 srct=server destt=dr libr=liblt01 device=/dev/XXXX >define dr liblt0 DRIVE2 >define path TSMSERVER drive2 srct=server destt=dr libr=liblt01 device=/dev/XXXX If it still don't work. Make a search in the message file for your drives or look in /proc for more information. You maybe also need to upgrade your drivers for your IBM drives. Best Regards Christian Svensson Cell: +46-70-325 1577 E-mail: christian.svens...@cristie.se Skype: cristie.christian.svensson ________________________________________ Från: ADSM: Dist Stor Manager [ads...@vm.marist.edu] för Mario Behring [mariobehr...@yahoo.com] Skickat: den 7 juli 2009 07:04 Till: ADSM-L@VM.MARIST.EDU Ämne: Library unavailable Hi list, When trying to define drives I get the following message: DEFINE DRIVE LIBLTO1 LIB1DRIVE0 ELEMENT=256 ONLINE=Yes WWN="500308FF421B4001" SERIAL="1110165508" ANR2017I Administrator SERVER_CONSOLE issued command: DEFINE DRIVE LIBLTO1 LIB1DRIVE0 ELEMENT=256 ONLINE=Yes WWN=500308FF421B4001 SERIAL=1110165508 ANR8444E DEFINE DRIVE: Library LIBLTO1 is currently unavailable. The library is defined... DEFINE LIBRARY LIBLTO1 LIBTYPE=SCSI SERIAL="0000013203721000" SHARED=NO ANR2017I Administrator SERVER_CONSOLE issued command: DEFINE LIBRARY LIBLTO1 LIBTYPE=SCSI SERIAL=0000013203721000 SHARED=NO ANR8400I Library LIBLTO1 defined. The library is an IBM ULT3583-TL with 3 drives. TSM is 5.2.2.2 running on Linux SuSE. I cannot upgrade it due to license issues...not at this time anyway. TSM Server was running fine until a week ago when it stopped at some point...not clear to me. I removed it completely and I am trying to install it again, but it keeps telling me the library is unavailable. The TSM Device Driver was installed, but I believe it was not being used because it does not support the current Linux Kernel version. tsmlinux:/opt/tivoli/tsm/devices/bin # ./tsmscsi TSM device driver not available for kernel release 2.4.21-241-smp Any help is appreciated. Mario
