Does ALMS apply to the TS3310? No. On Wed, Nov 5, 2008 at 5:01 PM, Clark, Robert A <[EMAIL PROTECTED] > wrote:
> Do you have virtual I/O enabled? > > Does 3576lib and its control path drive really correspond to cgoatl03? > > [RC] > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of > Lamb, Charles P. > Sent: Wednesday, November 05, 2008 7:44 AM > To: ADSM-L@VM.MARIST.EDU > Subject: [ADSM-L] IBM TS3310 Checkin/Checkout Tape Operational Question > > Hi......... > > We have just installed a brand new TS3310 ==> IBM 3576-L5B ATL. Atape > version is 11.2.7.0 and ATL version is 500GS002 which appears to be > current. TSM version is 5.4.3.2 and IBM 7026-H70 AIX V5.3.8.3. We have > an IBM 3584-L32/D32 ATL which works differently concerning the > checkin/checkout tapes via I/O slots. Does the TS3310 I/O slots work > differently as oppose to the IBM 3584-L32/D32 ATL I/O slots. See below > for the TS3310 operational tasks. > > We have run tapeutil -f /dev/smc0 inventory which shows robot, I/O > slots, drives and library slots. > > Step one of this morning..... > 1) Placed tapes into I/O slots > 2) IBM 3576 screen asked where the tapes should go system or > cgoatl03 - hit cgoatl03 button and OK button > 3) Ran label libv 3576lib checkin=scr overwrite=yes search=bulk > labelsource=barcode > 4) We found in activity log anr8386w messages -- slot xx of library > 3576lib is inaccessible, slot xx are the I/O slots > > Step two this morning..... > 1) Placed tapes into I/O slots > 2) IBM 3576 screen asked where the tapes should go system or > cgoatl03 - hit cgoatl03 button and OK button > 3) We went into IBM 3576 web GUI and manually moved the tapes from > I/O slots to IBM 3576 library open slots > 4) Ran label libv 3576lib checkin=scr overwrite=yes search=bulk > labelsource=barcode > 5) Ran q libv and showed the tapes as scratch tapes > > Why do we need step #3 above?? Is this normal?? > > > DISCLAIMER: > This message is intended for the sole use of the addressee, and may contain > information that is privileged, confidential and exempt from disclosure > under applicable law. If you are not the addressee you are hereby notified > that you may not use, copy, disclose, or distribute to anyone the message or > any information contained in the message. If you have received this message > in error, please immediately advise the sender by reply email and delete > this message. >
