hmmm... Perhaps a difference in virtual drives vs. physical? Or Windows vs AIX? We are Virtual and Windows.
Thanks for your assistance Howard. -Brett -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Howard Coles Sent: Wednesday, July 30, 2008 12:56 PM To: [email protected] Subject: Re: [ADSM-L] Upgrade from 5.3.3 to 5.4.3 Yes, I see the WWN. tsm: TSMSRV>q drive f=d Library Name: <libname> Drive Name: <drivename>01 Device Type: LTO On-Line: Yes Read Formats: ULTRIUM3C,ULTRIUM3,ULTRIUM2C,ULT- RIUM2,ULTRIUMC,ULTRIUM Write Formats: ULTRIUM3C,ULTRIUM3,ULTRIUM2C,ULT- RIUM2 Element: 257 Drive State: EMPTY Volume Name: Allocated to: WWN: 5005076###0##### Serial Number: ########## Last Update by (administrator): ADMINID Last Update Date/Time: 08/08/2006 08:41:42 Cleaning Frequency (Gigabytes/ASNEEDED/NONE): ASNEEDED That repeats for the number of drives in my 3584. (this works in 5.2.9 as well) See Ya' Howard > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf > Of Whitlock, Brett > Sent: Wednesday, July 30, 2008 12:14 PM > To: [email protected] > Subject: Re: [ADSM-L] Upgrade from 5.3.3 to 5.4.3 > > Hey Howard, > The drives appear to be working but I can't see the WWN. I did the Q > Dr f=d and it reports on the drives and the serial numbers. However, > I don't remember this query ever showing the WWN's. In my experience the > command line will give you the serial number (but not WWN) and the mgmt > console shows the WWN (but not serial #). If you do a q dr f=d are you > seeing both? > Thanks-Brett > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf > Of Howard Coles > Sent: Wednesday, July 30, 2008 11:11 AM > To: [email protected] > Subject: Re: [ADSM-L] Upgrade from 5.3.3 to 5.4.3 > > Can you see them when you query from the Admin Console (command line)? > That would determine whether you had an interface problem or a db > problem. > > q drive libname drivename f=d > > See Ya' > Howard > > > -----Original Message----- > > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf > > Of Whitlock, Brett > > Sent: Wednesday, July 30, 2008 10:56 AM > > To: [email protected] > > Subject: [ADSM-L] Upgrade from 5.3.3 to 5.4.3 > > > > Hi all, After upgrading from 5.3.3 to 5.4.3 (Windows) When I open a > > management console and try to look at the device information, I can't > > see the World Wide Names of my devices anymore. Happen to anyone > else? > > Suggestions? > > > > Thanks - Brett
