I am trying to install the downlevel console on the windows TSM SERVER host.
The error message I receive is: "The Tivoli Storage Manager Console can not be installed with the Tivoli Storage Manager Server. Remove the TSM Server and try again." Am I doing something wrong? Do I need to poke around some more? I don't see any way to de-couple the installation of the console from the server or just remove the 5.5.1.0 console. Both are on a test box. Worst come to worst, I'll create a VM to run the down-level console to run the Op Rept against the TSM test server. Wanting to test some tweaking of the report (and not on a production TSM server). Thanks Bill! thanks! lisa -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Bill Boyer Sent: Friday, July 18, 2008 6:23 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] TSM upgrade to 5.5.1 Sure you can. Just download the TSMCON package from the Windows server maintenance directory on the FTP server. Just needs a Winders box. -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Laughlin, Lisa Sent: Friday, July 18, 2008 4:29 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: TSM upgrade to 5.5.1 Unless you are actually running a TSM server on windows, and you can't install the console separately.... thanks! lisa -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Phillip Burgess Sent: Friday, July 18, 2008 7:35 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] TSM upgrade to 5.5.1 If you use TSM operational reporting, then you need to install an older version of the TSM Management console such as 5.5.0.3, otherwise it will fail to generate any reports. I would not consider this a major bug, more of an annoyance. Phil ________________________________ From: Björn Rackoll [mailto:[EMAIL PROTECTED] Sent: Fri 18/07/2008 12:28 To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] TSM upgrade to 5.5.1 Hi Phil, > Try running Ops reporting on your test server ;) how exactly (e.g., using which command) do you do that? How severe would you consider that problem? Regards, -- Bjoern Rackoll University of Hamburg Regionales Rechenzentrum Zentrale Dienste Schlueterstr. 70 20146 Hamburg Tel.: +49 (0)40 42838 - 63 11 Fax: +49 (0)40 42838 - 62 70 E-Mail: [EMAIL PROTECTED]
