Hi, I have been using 5.5.0.0 (I know base level not good for production) and have just gone to 5.5.1 . No problems to date. In fact it seems more stable and faster at daily tasks. The upgrade process is amazingly fast and efficient.
Simple test were backup and restore of each client, TDP, Exchange etc. Environment = AIX on P570 LPAR, EMC SAN, TS3310 Libr 108 Slots, 4 LTO3 Drives. Good Luck Regards Adrian Compton Aspen Pharmacare Port Elizabeth tel: +2741 4072855 Fax: +2741 453 7452 Cell: +27823204495 Email: [EMAIL PROTECTED] -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Björn Rackoll Sent: 17 July 2008 16:03 PM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] TSM upgrade to 5.5.1 Hi, currently we have TSM 5.3.4.2 running on AIX 5.3 (and an IBM 3494 tape library with eight 3592 drives, Atape 10.7.3.0) and are planning to upgrade to 5.5.1.0 soon. I've already tested this upgrade on my test machine, and it worked fine. This absence of any problem made me even a bit suspicious. :-) My questions: - Which kind of tests would you recommend performing before you'd declare a new TSM version 'ready for production'? I've read Technote 1196013 and the relevant section in ADSM.QuickFacts. Performing a simple backup and restore from different clients worked fine, LAN-free is not used. - Do you know of any pitfalls in 5.5.1.0 or should it be safe to use on the server? Regards, -- Bjoern Rackoll University of Hamburg Regionales Rechenzentrum Zentrale Dienste Schlueterstr. 70 20146 Hamburg Tel.: +49 (0)40 42838 - 63 11 Fax: +49 (0)40 42838 - 62 70 E-Mail: [EMAIL PROTECTED]
