It can be a cartridge problems too Had you changed the output cartridge ?
If tapeutil failed, check errlog then call AIX support > -----Message d'origine----- > De : ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] De > la part de hshahizul > Envoyé : vendredi 21 décembre 2007 18:18 > À : ADSM-L@VM.MARIST.EDU > Objet : Re: [ADSM-L] write failed using tsm but write > successful vi tar command > > Thanks Mr. Caye Pierre. > > I will try this again. I have done it as well. I'm suspecting > error come from SCSI cable or terminator. (wild guest while > looking at error report). > I will post the result next week since I will be on leave for > a week. My local time (Malaysia) is midnight. > > Mercy. > > Zul. > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] > On Behalf Of CAYE PIERRE > Sent: Friday, December 21, 2007 11:39 PM > To: ADSM-L@VM.MARIST.EDU > Subject: Re: [ADSM-L] write failed using tsm but write > successful vi tar command > > Errno 5 mean I/O Error for AIX > > So try : > > rmdev -l rmt0 > mkdev -l rmt0 > > Then retry a migration > > > -----Message d'origine----- > > De : ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] > De la part > > de hshahizul Envoyé : vendredi 21 décembre 2007 16:36 À : > > ADSM-L@VM.MARIST.EDU Objet : Re: [ADSM-L] write failed > using tsm but > > write successful vi tar command > > > > I managed to label the tape. I managed to checkin the volume. > > While the migration processes start, the volume is mounted in the > > drive. I can see from console that the volume is mounted in > the drive. > > The problem is while writing. > > > > Anyway, thanks for your idea. > > > > -----Original Message----- > > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] > On Behalf > > Of CAYE PIERRE > > Sent: Friday, December 21, 2007 11:32 PM > > To: ADSM-L@VM.MARIST.EDU > > Subject: Re: [ADSM-L] write failed using tsm but write > successful vi > > tar command > > > > Had you labeled the tapes ? > > > > > > > > > -----Message d'origine----- > > > De : ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] > > De la part > > > de hshahizul Envoyé : vendredi 21 décembre 2007 16:26 À : > > > ADSM-L@VM.MARIST.EDU Objet : Re: [ADSM-L] write failed > > using tsm but > > > write successful vi tar command > > > > > > No, but I will try to do that. Anyway, no harm trying. > > > Thanks for the idea > > > > > > -----Original Message----- > > > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] > > On Behalf > > > Of Helder Garcia > > > Sent: Friday, December 21, 2007 3:31 AM > > > To: ADSM-L@VM.MARIST.EDU > > > Subject: Re: [ADSM-L] write failed using tsm but write > > successful vi > > > tar command > > > > > > hi, did you tried using mt0 instead of rmt0? > > > > > > On Dec 17, 2007 1:27 PM, hshahizul <[EMAIL PROTECTED]> wrote: > > > > > > > Some one pleases help. I'm stuck more then a week for > this error. > > > > > > > > > > > > > > > > TSM Server 5.4.0.0 > > > > > > > > AIX 5.3 > > > > > > > > Tape Library TS3100 (single drive) > > > > > > > > Atape Driver 9.7.5.0 > > > > > > > > > > > > > > > > dev type : LTO > > > > > > > > devc format : ultrium3c > > > > > > > > Drive Ultrium3 > > > > > > > > > > > > > > > > # lsdev -Cc tape > > > > > > > > rmt0 Available 07-08-00-4,0 IBM 3580 Ultrium Tape Drive > > > > > > > > smc0 Available 07-08-00-4,1 IBM 3573 Tape Medium Changer > > > > > > > > > > > > > > > > > > > > > > > > # lscfg -vl rmt0 > > > > > > > > rmt0 U787B.001.DNWG37G-P1-C5-T1-L4-L0 IBM > > > 3580 Ultrium Tape > > > > Drive > > > > > > > > > > > > > > > > Manufacturer................IBM > > > > > > > > Machine Type and Model......ULT3580-TD3 > > > > > > > > Serial Number...............1210283884 > > > > > > > > Device Specific.(FW)........73P5 > > > > > > > > > > > > > > > > # lscfg -vl smc0 > > > > > > > > smc0 U787B.001.DNWG37G-P1-C5-T1-L4-L1 IBM 3573 Tape > > > Medium Changer > > > > > > > > > > > > > > > > Manufacturer................IBM > > > > > > > > Machine Type and Model......3573-TL > > > > > > > > Serial Number...............00L2U78C2421_LL0 > > > > > > > > Device Specific.(FW)........3.70 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I have tried to migrate from diskpool to tapepool but > failed with > > > > error > > > > > > > > ANR8311E An I/O error occurred while accessing drive > > > > > > > > DRIVE1 (/dev/rmt0) for WRITE operation, errno = 5. > > > > > > > > > > > > > > > > I tried to write via tar command [ tar -cvf /dev/rmt0 > /tmp ]. It > > > > successfull write to tape > > > > > > > > > > > > > > > > I tried to used tapeutil facility (halt TSM Server) > > > > > > > > > > > > > > > > > > > > > > > > Without lto3 tape inside tape drive : option 37 (write) > > > > > > > > ..... > > > > > > > > Writing file to tape... > > > > > > > > Write terminated, 0 total bytes written... > > > > > > > > Operation failed with errno 46: Device not ready > > > > > > > > Residual count: 4125543 > > > > > > > > Error Sense Data, Length 96 > > > > > > > > > > > > > > > > With lto3 tape mount inside tape drive : option 37 (write) > > > > > > > > ...... > > > > > > > > Writing file to tape... > > > > > > > > Write terminated, 0 total bytes written... > > > > > > > > Operation failed with errno 5: I/O error > > > > > > > > Residual count: 4125543 > > > > > > > > > > > > > > > > > > > > > > > > I have tried to install TSM 5.5 and Atape 10.3.7.0 but the > > > result is > > > > still the same. > > > > > > > > I also tried to update devclass class=drive , but still the > > > same output. > > > > > > > > > > > > > > > > The question here, why via tar command , tape can be > written but > > > > cannot via TSM > > > > > > > > > > > > > > > > Tq. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Additional Info > > > > > > > > One more things, while the process of migration take place > > > AIX error > > > > report produce as below: > > > > > > > > > > > > > > > > ======================================== > > > > > > > > LABEL: TAPE_ERR4 > > > > > > > > IDENTIFIER: 5537AC5F > > > > > > > > > > > > > > > > Date/Time: Mon Dec 17 22:06:25 WAUST 2007 > > > > > > > > Sequence Number: 2782 > > > > > > > > Machine Id: 000535C7D600 > > > > > > > > Node Id: db3 > > > > > > > > Class: H > > > > > > > > Type: PERM > > > > > > > > Resource Name: rmt0 > > > > > > > > Resource Class: tape > > > > > > > > Resource Type: 3580 > > > > > > > > Location: U787B.001.DNWG37G-P1-C5-T1-L4-L0 > > > > > > > > VPD: > > > > > > > > Manufacturer................IBM > > > > > > > > Machine Type and Model......ULT3580-TD3 > > > > > > > > Serial Number...............1210283884 > > > > > > > > Device Specific.(FW)........73P5 > > > > > > > > > > > > > > > > Description > > > > > > > > TAPE DRIVE FAILURE > > > > > > > > > > > > > > > > Probable Causes > > > > > > > > ADAPTER > > > > > > > > TAPE DRIVE > > > > > > > > > > > > > > > > Failure Causes > > > > > > > > ADAPTER > > > > > > > > TAPE DRIVE > > > > > > > > > > > > > > > > Recommended Actions > > > > > > > > PERFORM PROBLEM DETERMINATION PROCEDURES > > > > > > > > > > > > > > > > Detail Data > > > > > > > > SENSE DATA > > > > > > > > 0604 0000 0A00 0400 0000 0000 0000 0000 0200 0200 0000 0000 > > > 0000 0000 > > > > 0000 0000 > > > > > > > > 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 > > > 0000 0000 > > > > 0000 0000 > > > > > > > > 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 > > > 0000 0000 > > > > 0000 0000 > > > > > > > > 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 > > > 0000 0000 > > > > 0000 0000 > > > > > > > > 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 > > > 0000 0000 > > > > > > > > > > > > > > > -------------------------------------------------------------- > > > ------------- > > > > > > > > LABEL: SCSI_ERR10 > > > > > > > > IDENTIFIER: 0BA49C99 > > > > > > > > > > > > > > > > Date/Time: Mon Dec 17 22:06:25 WAUST 2007 > > > > > > > > Sequence Number: 2781 > > > > > > > > Machine Id: 000535C7D600 > > > > > > > > Node Id: db3 > > > > > > > > Class: H > > > > > > > > Type: TEMP > > > > > > > > Resource Name: scsi2 > > > > > > > > Resource Class: driver > > > > > > > > Resource Type: sisscsi > > > > > > > > Location: U787B.001.DNWG37G-P1-C5-T1 > > > > > > > > VPD: > > > > > > > > ROM Level.(alterable).......05080092 > > > > > > > > Product Specific.(CC).......5702 > > > > > > > > > > > > > > > > Description > > > > > > > > SCSI BUS ERROR > > > > > > > > > > > > > > > > Probable Causes > > > > > > > > CABLE > > > > > > > > CABLE TERMINATOR > > > > > > > > DEVICE > > > > > > > > ADAPTER > > > > > > > > > > > > > > > > Failure Causes > > > > > > > > CABLE LOOSE OR DEFECTIVE > > > > > > > > DEVICE > > > > > > > > ADAPTER > > > > > > > > > > > > > > > > Recommended Actions > > > > > > > > PERFORM PROBLEM DETERMINATION PROCEDURES > > > > > > > > CHECK CABLE AND ITS CONNECTIONS > > > > > > > > > > > > > > > > Detail Data > > > > > > > > SENSE DATA > > > > > > > > 0000 FFFF 1900 00F0 0629 0000 0301 0000 0508 0092 0000 00FF > > > 5702 0000 > > > > 0000 0000 > > > > > > > > E210 0080 FF00 0000 0310 0010 0D5A 89F9 0000 0000 0000 03E8 > > > 0629 0000 > > > > 0000 FFFF > > > > > > > > FFFF FFFF 1025 3380 0000 0000 28E2 0300 0000 0003 8300 0000 > > > 8000 0000 > > > > 8000 0000 > > > > > > > > ..... > > > > > > > > > > > > > > > > > > > > > > > -------------------------------------------------------------- > > > ------------- > > > > > > > > LABEL: TAPE_ERR4 > > > > > > > > IDENTIFIER: 5537AC5F > > > > > > > > > > > > > > > > Date/Time: Mon Dec 17 22:05:42 WAUST 2007 > > > > > > > > Sequence Number: 2780 > > > > > > > > Machine Id: 000535C7D600 > > > > > > > > Node Id: db3 > > > > > > > > Class: H > > > > > > > > Type: PERM > > > > > > > > Resource Name: rmt0 > > > > > > > > Resource Class: tape > > > > > > > > Resource Type: 3580 > > > > > > > > Location: U787B.001.DNWG37G-P1-C5-T1-L4-L0 > > > > > > > > VPD: > > > > > > > > Manufacturer................IBM > > > > > > > > Machine Type and Model......ULT3580-TD3 > > > > > > > > Serial Number...............1210283884 > > > > > > > > Device Specific.(FW)........73P5 > > > > > > > > > > > > > > > > Description > > > > > > > > TAPE DRIVE FAILURE > > > > > > > > > > > > > > > > Probable Causes > > > > > > > > ADAPTER > > > > > > > > TAPE DRIVE > > > > > > > > > > > > > > > > Failure Causes > > > > > > > > ADAPTER > > > > > > > > TAPE DRIVE > > > > > > > > > > > > > > > > Recommended Actions > > > > > > > > PERFORM PROBLEM DETERMINATION PROCEDURES > > > > > > > > > > > > > > > > Detail Data > > > > > > > > SENSE DATA > > > > > > > > 0604 0000 0A00 0400 0000 0000 0000 0000 0200 0200 0000 0000 > > > 0000 0000 > > > > 0000 0000 > > > > > > > > 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 > > > 0000 0000 > > > > 0000 0000 > > > > > > > > 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 > > > 0000 0000 > > > > 0000 0000 > > > > > > > > 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 > > > 0000 0000 > > > > 0000 0000 > > > > > > > > 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 > > > 0000 0000 > > > > > > > > > > > > > > > -------------------------------------------------------------- > > > ------------- > > > > > > > > LABEL: SCSI_ERR10 > > > > > > > > IDENTIFIER: 0BA49C99 > > > > > > > > > > > > > > > > Date/Time: Mon Dec 17 22:05:42 WAUST 2007 > > > > > > > > Sequence Number: 2779 > > > > > > > > Machine Id: 000535C7D600 > > > > > > > > Node Id: db3 > > > > > > > > Class: H > > > > > > > > Type: TEMP > > > > > > > > Resource Name: scsi2 > > > > > > > > Resource Class: driver > > > > > > > > Resource Type: sisscsi > > > > > > > > Location: U787B.001.DNWG37G-P1-C5-T1 > > > > > > > > VPD: > > > > > > > > ROM Level.(alterable).......05080092 > > > > > > > > Product Specific.(CC).......5702 > > > > > > > > > > > > > > > > Description > > > > > > > > SCSI BUS ERROR > > > > > > > > > > > > > > > > Probable Causes > > > > > > > > CABLE > > > > > > > > CABLE TERMINATOR > > > > > > > > DEVICE > > > > > > > > ADAPTER > > > > > > > > > > > > > > > > Failure Causes > > > > > > > > CABLE LOOSE OR DEFECTIVE > > > > > > > > DEVICE > > > > > > > > ADAPTER > > > > > > > > > > > > > > > > Recommended Actions > > > > > > > > PERFORM PROBLEM DETERMINATION PROCEDURES > > > > > > > > CHECK CABLE AND ITS CONNECTIONS > > > > > > > > > > > > > > > > Detail Data > > > > > > > > SENSE DATA > > > > > > > > 0000 FFFF 1900 00F0 0629 0000 0301 0000 0508 0092 0000 00FF > > > 5702 0000 > > > > 0000 0000 > > > > > > > > E210 0080 FF00 0000 0310 000F 0D18 D559 0000 0000 0000 03E8 > > > 0629 0000 > > > > 0000 FFFF > > > > > > > > .... > > > > > > > > > > > > > > > > > > > > > > > > Zul > > > > > > > > > > > > > > > > -- > > > Helder Garcia > > > > > >
