I ran into a similar issue and found a new STG was defined and the new default for collocate is "group". I changed that to none. Then did a move data on every volume in the "filling" state.
I reviewed every STG for all 4 TSM servers and did not find that issue but did find a number of low utilized volumes. I'm still trying to figure out why. If anyone has any theories on why I have more than "normal" filling with low utilization I'd appreciate the input. Thanks, Duane -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Nicholas Rodolfich Sent: Tuesday, October 09, 2007 2:08 PM To: ADSM-L@VM.MARIST.EDU Subject: How to reclaim "FILLING" volumes Hi All, Thanks for your help!! I have TSM server 5.3.5 on AIX 5.3.5 with an IBM 3584 library with 16 drives. In my offsite pool I have approximately 300 volumes with very low utilization but they are in the FILLING state, I would expect them to be in the FULL, EMPTY or PENDING state. Is there a way to target these volumes with reclamation? I suppose I could do a move data on all of them? Nicholas Rodolfich Network Administrator (AIX) East Jefferson General Hospital 504-883-6955 (office) 228-223-1187 (mobile) [EMAIL PROTECTED] IMPORTANT NOTICE: This message and any included attachments are from East Jefferson General Hospital, and is intended only for the addressee(s), and may include Protected Health (PHI) or other confidential information. If you are the intended recipient, you are obligated to maintain it in a secure and confidential manner and re-disclosure without additional consent or as permitted by law is prohibited. If you are not the intended recipient, use of this information is strictly prohibited and may be unlawful. Please promptly reply to the sender by email and delete this message from your computer. East Jefferson General Hospital greatly appreciates your cooperation.
