Hi Juan, in this env we are a little bit different We don't want to deactivate the old library (the library it self is not old, it has the same config as the new lib, LTO3 FC, 44 sltos)
What I want to do is like this: Today I have a pool: SP-FILESYSTEM-LTO -> LTOCLASS1 -> LTOLIB1 In this pool I have 100 tapes off library With new library: SP-FILESYSTEM-LTO-NEW -> LTOCLASSNEW -> LTOLIBNEW And pass this tapes that are off to this lib, without deactivating de LTOLIB1 Atenciosamente, Vinicius do Valle Fraga Engenheiro de Sistemas VANguard - Value Added Network guardians http://www.vanguard-it.com.br Fone: 55 11 5103-0941 -----Mensagem original----- De: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Em nome de Juan Perla Enviada em: Tuesday, October 09, 2007 11:40 AM Para: ADSM-L@VM.MARIST.EDU Assunto: Re: [ADSM-L] RES: [ADSM-L] Volumes off library Hey, We just did something similar. we started with 1 old acsls library (library=lsm2 and acsid=1) 4 tapedrives and 300 cartridges we ended with 1 new acsls library (libray=lsm2 acsid=2) 4 tapedrives and 300 cartridges. 1)created the 4 new tape drives in the lsm2 library that were physically located in the new library (silo acsid=2) 2)disabled the 4 old tape drives in the old silo (acsid=1) 3)updated the old lsm2 library to have acsid=2 4)enabled the 4 new tape drives 5)then we physically ejected from the old library and entered into the new library. all worked fine. Hope this helps, Juan Perla On Tue, 9 Oct 2007, Vinicius Fraga wrote: > Date: Tue, 9 Oct 2007 11:19:16 -0300 > From: Vinicius Fraga <[EMAIL PROTECTED]> > Reply-To: "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> > To: ADSM-L@VM.MARIST.EDU > Subject: [ADSM-L] RES: [ADSM-L] Volumes off library > > Ok, let me detail the env. > > This client has 4 libraries (LTOLIB1 / LTOLIB2 / LTOLIB3 / LTOLIB4) each > library has 44 slots and 2 drivers, the library LTOLIB1 and LTOLIB2 are > destiny of filesystem data, and this 2 libraries are overloaded with > aprx 100 tapes off librarie. > > The client is putting additional 3 libraries in the env, in the same > config (44 sltos and 2 drivers). > > The question is how to make the older tapes into the new library? I will > have to migrate the volumes? > > > > Atenciosamente, > > Vinicius do Valle Fraga > Engenheiro de Sistemas > VANguard - Value Added Network guardians > http://www.vanguard-it.com.br > Fone: 55 11 5103-0941 > > -----Mensagem original----- > De: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Em nome de > Larry Clark > Enviada em: Monday, October 08, 2007 5:29 PM > Para: ADSM-L@VM.MARIST.EDU > Assunto: Re: [ADSM-L] Volumes off library > > I'm trying to understand your situation.... > The new library is the same as the old but larger...more slots? > -storage pools defs reference device classes > -device class defs reference libraries > > So, I'm thinking, you might be able to > - check the remaining volumes out of the current library > - update the device class def to point to the new library > - check the current ones and the new ones into the newer, larger > library. > > ----- Original Message ----- > From: "Vinicius Fraga" <[EMAIL PROTECTED]> > To: <ADSM-L@VM.MARIST.EDU> > Sent: Monday, October 08, 2007 3:23 PM > Subject: [ADSM-L] Volumes off library > > > Hi guys, > > I have a client that has too many volumes off library, about (100 > volumes), > and each time it request a restore, it take about 20 volumes, and mostly > off > times this volumes is offsite, > > Well i know it's a sizing problem, but this is not the question here, > > The client bought 3 knew library (aprx. 120 slots) now he want to put > this > volumes (100 volumes) inside the library, but there isn't any way to > change > the pool of a volume (like update volume xxxx stg=yyyy), so i will need > to > migrate all data to the new pool? i don't want to deactive the actual > library >
