Hi, My TSM V5.3 Server is running on Windows 2003, and IBM 3584 Tape library is connected through SAN.
Through ISC Administration center, under storage devices the library status is good. But the drives status is UNKNOWN. Please tell me how I can proceed further. Thanks and Regards Murugan -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Farren Minns Sent: Thursday, December 28, 2006 3:29 PM To: [email protected] Subject: Re: [ADSM-L] TAPE DRIVE STATE UNKNOWN Hi I sometimes have network related issues with my 3494 library. How is your TSM server connected to the library and what OS is the server? When you start TSM, does it actually say that the library is ready for operations? My library is directly attached with a crossover network cable so it's on its own private network. If I get issues with communication, i just unplug the network cable from the back of the server, leave it a few seconds and then plug it back in. It normally establishes a connection again and things are OK. Farren ---------------------------------------------------------------------- The information contained in this e-mail and any subsequent correspondence is private and confidential and intended solely for the named recipient(s). If you are not a named recipient, you must not copy, distribute, or disseminate the information, open any attachment, or take any action in reliance on it. If you have received the e-mail in error, please notify the sender and delete the e-mail. Any views or opinions expressed in this e-mail are those of the individual sender, unless otherwise stated. Although this e-mail has been scanned for viruses you should rely on your own virus check, as the sender accepts no liability for any damage arising out of any bug or virus infection. John Wiley & Sons Limited is a private limited company registered in England with registered number 641132. Registered office address: The Atrium, Southern Gate, Chichester, West Sussex, PO19 8SQ. ---------------------------------------------------------------------- DISCLAIMER: This email (including any attachments) is intended for the sole use of the intended recipient/s and may contain material that is CONFIDENTIAL AND PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or distribution or forwarding of any or all of the contents in this message is STRICTLY PROHIBITED. If you are not the intended recipient, please contact the sender by email and delete all copies; your cooperation in this regard is appreciated.
