I am trying to check in a new LTO3 tape in our new IBM 3582 TSM tape
library that was installed a month ago.
However it keeps failing. I would like to know if I am doing it
correctly before logging a fault call with IBM.
I am placing the new tape with the barcode label on it, in the IO slot
on the right side of the unit.
The command I execute is:
tsm: ANLTSM>label libvol lb1.1.0.3 818ACFL2 checkin=scratch
ANS8003I Process number 593 started.
tsm: ANLTSM>q pr
Process Process Description Status
Number
-------- --------------------
-------------------------------------------------
593 LABEL LIBVOLUME ANR8804I Labelling volume 818ACFL2 in
library
LB1.1.0.3.
tsm: ANLTSM>q req
ANR8352I Requests outstanding:
ANR8306I 153: Insert LTO volume 818ACFL2 R/W into the slot with element
number 4112
of library LB1.1.0.3 within 60 minutes; issue 'REPLY' along with the
request ID when
ready.
The error that appears in the log when it fails is:
11/08/2006 13:28:10 ANR8300E I/O error on library LB1.1.0.3
(OP=8401C058,
CC=314, KEY=FF, ASC=FF, ASCQ=FF,
SENSE=**NONE**,
Description=The source slot or drive was empty
in an
attempt to move a volume). Refer to Appendix
D in the
'Messages' manual for recommended action.
(SESSION: 7292,
PROCESS: 593)
11/08/2006 13:28:10 ANR8942E Could not move volume 818ACFL2 from
slot-element
4112 to slot-element 257. (SESSION: 7292,
PROCESS: 593)
11/08/2006 13:28:10 ANR8802E LABEL LIBVOLUME process 593 for
library LB1.1.0.3
failed. (SESSION: 7292, PROCESS: 593)
Regards
Paul
Paul Dudley
ANL IT Operations Dept.
ANL Container Line
[EMAIL PROTECTED]
ANL - CELEBRATING 50 YEARS
ANL DISCLAIMER
This e-mail and any file attached is confidential, and intended solely to the
named addressees. Any unauthorised dissemination or use is strictly prohibited.
If you received this e-mail in error, please immediately notify the sender by
return e-mail from your system. Please do not copy, use or make reference to it
for any purpose, or disclose its contents to any person.
