To whom it may concern; We run reclaims manually at this time do to tape drive constraints. I was running reclamation earlier which I started by updating the sequential storage pools reclaim threshold from 100% to 95%. I cancelled the job to free up drives for tape loading/unloading. Since that time I cannot restart the reclamation on the pool. I have tried setting the reclaim threshold back to 100% then to 95% again but no process starts. According to my select statements I have 6 tapes which are over 95% reclaimable which are located in the library. I have done this before many times and it always worked (as long as tapes met the criteria). The activity log shows the command being issued and then nothing happens. There are no failures in the log. All tape drives are available.
TSM server 5.3 IBM 3584 with 4 ULTRIUM2 drives. One EMC CDL model 210 attached emulating a IBM 3884 library with 20 virtual 3580 drives. Any insight would be appreciated. George Hughes Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.
