Thanks all of your for valueable inputs. After replacing L2 media we were able to resolve this problem. Problem was the media itself.
Regards Pranav TSM_User <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> 10/05/2006 09:07 AM Please respond to "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> To ADSM-L@VM.MARIST.EDU cc Subject Re: [ADSM-L] TS3310 - Library Configuration - Help Required Are you trying to label and LTO1 tape. A TS3310 only supports LTO3 drives. LTO3 drives can not write to LTO1 media. Or, even if the tapes are LTO3 do they have LTO1 labels on them. TSM will see the "L1" on the tape label and being that the LTO3 drives can't write to an L1 tape you can get the error no drives are available. K Pranav Parikh <[EMAIL PROTECTED]> wrote: Hi, We are in a process of upgrading our current TSM5.2 setup. Our current enviornment consist of following: 1. TSM5.2 on x346 (Win2K /Sp4) 2. 3582 SCSI Single drive Gen2 Autoloader 3. BA CLient - 3 , TDP for Lotus Domino -1 4. 100 MBps Network. Lan based backup Our new enviornment once set will look like: 1. TSM 5.3.2 on HPBL20 Blade (Win2K3 / SP1). HP Blade consist of HBA QLA2312 2. TS3310 with 2 Gen3 fiber drives connected to Baracoda SAN Switch 3. All clients migrated on Blade center 4. LAN Free Agents for existing clients. I am getting following error while lableing the volume. The storage device i.e library, drive and device configured using define command and path shows status good (Green). Error: Date/Time : 9/28/06 2:20:09 PM GMT+05:30 Message : ANR2017I Administrator ADMIN issued command: LABEL libvol LTCLIB search=BULK labelsource=barcode overwrite=YES checkin=SCRATCH WAITTIME=0 (SESSION: 112) Date/Time : 9/28/06 2:20:09 PM GMT+05:30 Message : ANR0984I Process 13 for LABEL LIBVOLUME started in the BACKGROUND at 14:20:09.(SESSION: 112, PROCESS: 13) Date/Time : 9/28/06 2:20:09 PM GMT+05:30 Message : ANR8799I LABEL LIBVOLUME: Operation for library LTCLIB started as process 13.(SESSION: 112, PROCESS: 13) Date/Time : 9/28/06 2:20:19 PM GMT+05:30 Message : ANR8447E No drives are currently available in library LTCLIB.(SESSION: 112, PROCESS: 13) Date/Time : 9/28/06 2:20:19 PM GMT+05:30 Message : ANR8802E LABEL LIBVOLUME process 13 for library LTCLIB failed.(SESSION: 112, PROCESS: 13) Date/Time : 9/28/06 2:20:19 PM GMT+05:30 Message : ANR0985I Process 13 for LABEL LIBVOLUME running in the BACKGROUND completed with completion state FAILURE at 14:20:19.(SESSION: 112, PROCESS: 13) Attached is the various logs which may be helpful to get furhter info on the setup. Request you to suggest if any what can be the problem with the configuration. Defining path communicate with library / drives and detects serial nos. Regards Pranav --------------------------------- Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1ยข/min.
