My general advice for newbies: Take home the TSM Admin Guide and Admin Reference. Read the Admin Guide from cover to cover. As commands and options are discussed in the guide, read up on them in the reference.
In the same fashion, also recommend reading the TSM Backup-Archive Client user's guide from cover to cover. Pick the client manual for the client you will be using the most. After that, you can probably "cherry-pick" material to read from the other client books that apply to your installation. Yes, it is a daunting task, given the size of the books, but if you can get through one or two chapters a day, you should be able to do it in a month or less; and you will find it to be a worthwhile investment of your time. It is my own experience that this is the best way to learn a product that you will be working with, and it will give you a good overall acquaintence with TSM's capabilities. In the admin guide, pay special attention to the chapters on protecting your TSM server (the database, recovery log, and storage pools). Also go to http://www.redbooks.ibm.com and in the search box, enter: "tivoli storage manager" You will find multiple hits of interest. Also bookmark the URL in my sig. Regards, Andy Andy Raibeck IBM Software Group Tivoli Storage Manager Client Development Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROTECTED] Internet e-mail: [EMAIL PROTECTED] IBM Tivoli Storage Manager support web page: http://www-306.ibm.com/software/sysmgmt/products/support/IBMTivoliStorageManager.html The only dumb question is the one that goes unasked. The command line is your friend. "Good enough" is the enemy of excellence. "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> wrote on 09/22/2006 07:56:29 AM: > Thanks. I'll try that. I did say I was a newbie! > > -----Original Message----- > From: Andrew Raibeck [mailto:[EMAIL PROTECTED] > Sent: 22 September 2006 15:49 > To: ADSM-L@VM.MARIST.EDU > Subject: Re: [ADSM-L] Newbie question 2! > > > I do not see the dependency on ISC. Just install the admin client (it's > available via custom install of the TSM backup-archive client) on your > remote machine. > > Andy Raibeck > IBM Software Group > Tivoli Storage Manager Client Development > Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROTECTED] > Internet e-mail: [EMAIL PROTECTED] > > IBM Tivoli Storage Manager support web page: > http://www-306.ibm.com/software/sysmgmt/products/support/IBMTivoliStorageMan > ager.html > > The only dumb question is the one that goes unasked. > The command line is your friend. > "Good enough" is the enemy of excellence. > > "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> wrote on 09/22/2006 > 07:38:38 AM: > > > -displaymode is a distinct step forward. now if I can just find > something > > equivalent for the ISC command-prompt mode, I'll be a happy man. It's > cold > > in the server room so I prefer to work remotely! > > > > Angus > > > > -----Original Message----- > > From: Andrew Raibeck [mailto:[EMAIL PROTECTED] > > Sent: 22 September 2006 15:23 > > To: ADSM-L@VM.MARIST.EDU > > Subject: Re: [ADSM-L] Newbie question 2! > > > > > > The -displaymode option is also a possibility. See the Admin Reference > > chapter about using the command line interface for details. > > > > Regards, > > > > Andy > > > > Andy Raibeck > > IBM Software Group > > Tivoli Storage Manager Client Development > > Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROTECTED] > > Internet e-mail: [EMAIL PROTECTED] > > > > IBM Tivoli Storage Manager support web page: > > > http://www-306.ibm.com/software/sysmgmt/products/support/IBMTivoliStorageMan > > ager.html > > > > The only dumb question is the one that goes unasked. > > The command line is your friend. > > "Good enough" is the enemy of excellence. > > > > "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> wrote on 09/22/2006 > > 07:13:10 AM: > > > > > Hey Angus, > > > > > > Are you talking about SQL statements appearing in a 'wide' format? If > > > so, then 'set sqldisplaymode wide' will work for you >>> > > > > http://192.168.1.10:2297/help/topic/com.ibm.itsmmsmunn.doc/anrsrf53400.h > > > tm > > > > > > Otherwise, certainly from my experience, as long as my terminal > display > > > is wide enough (for example, easy to resize in PuTTY) the output from > > > queries will make use of the whole terminal width. > > > > > > Hope that helps, > > > > > > Rgds, > > > > > > David McClelland > > > Data Protection Specialist > > > IBM Tivoli Storage Manager Certified Consultant > > > Reuters, London > > > > > > -----Original Message----- > > > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf > Of > > > Angus Macdonald > > > Sent: 22 September 2006 08:51 > > > To: ADSM-L@VM.MARIST.EDU > > > Subject: [ADSM-L] Newbie question 2! > > > > > > How do I convince my console output to display in wide format, like in > > > the redbooks? My course tutor did show me but that was 18 months > before > > > I touched Tivoli for real and it seemed so trivial I didn't make a > note > > > of it. > > > > > > Angus > > > > > > > > > This email was sent to you by Reuters, the global news and > > > information company. > > > To find out more about Reuters visit www.about.reuters.com > > > > > > Any views expressed in this message are those of the individual > > > sender, except where the sender specifically states them to be the > > > views of Reuters Ltd.
