Have you created the device through Smit -> Devices -> TSM Devices? Because it's not an IBM device, AIX will not recognize it by default, but it has to be created using the TSM device driver.
So what's new with the ping-pong within IBM :-(, if it's a software problem they will defer you to hardware who In it's turn will send you back to software again. Met vriendelijke groet, with kind regards, Richard van Denzel -----Oorspronkelijk bericht----- Van: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Namens Mcnutt, Larry E. Verzonden: dinsdag 6 juni 2006 20:04 Aan: ADSM-L@VM.MARIST.EDU Onderwerp: [ADSM-L] Missing device for library media changer. AIX 5.3.0.4 TSM 5.3.3.0 EMC CDL emulating a Quantum P7000 ATL We are currently running on a P650 with AIX 5.2.0.1, TSM 5.2.3.0 and the same EMC CDL library. On Sunday we tried to upgrade to a P570 AIX 5.3.0.4, TSM 5.3.3.0. We were able to get through the TSM part of the upgrade. The problem we are not able to resolve is getting AIX to "see" the device for the library media changer. On the old system this is /dev/lb0. We could see all 16 drives in AIX and in TSM. We have a PMR open and have been bounced between AIX and TSM with no answer yet. Looking for some wisdom from the list. Thanks, Larry McNutt The Timken Company ----------------------------------------- This message and any attachments are intended for the individual or entity named above. If you are not the intended recipient, please do not forward, copy, print, use or disclose this communication to others; also please notify the sender by replying to this message, and then delete it from your system. The Timken Company / The Timken Corporation
