Hi Everyone,
In working on some disk system issues I've learned about AIX support for
dynamic tracing of SAN devices
if a cable change occurs. This has come up several time for us where we've
wanted to move a tape drive
cable to a different switch ports.
The normal procedure for this is to . . .
disable the drive and path in tsm
delete the rmt devices (pri and alt devices - we're using atape)
move the cable
run cfgmgr
run instAtape to set alt/pri devices
update tsm path device if it is now different
enable drive and path
It looks like the dyntrk parm on the fscsiX adapter would basically allow
you to disable
the tape drive in tsm and do a quick cable change.
The atape driver manual doesn't mention support for this AIX feature.
Q) Does anyone know if it is supported by 3590 and 3592 drivers and atape?
below is a part of the AIX v5.2 readme where the feature was introduced
=========================================
Dynamic Tracking of Fibre Channel Devices
=========================================
This release provides support for Dynamic Tracking of Fibre Channel
Devices.
Previous releases of AIX required a user to unconfigure FC storage device
and
adapter device instances before making changes on the SAN that might result
in an N_Port ID (SCSI ID) change of any remote storage ports.
If Dynamic Tracking of FC Devices is enabled, the FC adapter driver will
detect when the Fibre Channel N_Port ID of a device changes and then
re-route
traffic destined for that device to the new address while the devices are
still online. Examples of events that can cause an N_Port ID to change are
moving a cable between a switch and storage device from one switch port to
another, connecting two separate switches via an Inter-Switch Link (ISL),
and possibly rebooting a switch.
Dynamic Tracking of FC devices is controlled by a new fscsi device
attribute,
'dyntrk'. The default setting for this attribute is 'no'. Setting this
attribute to 'yes', as shown in the example
chdev -l fscsi0 -a dyntrk=yes
<<< much cut >>>>
-----------------------------------------
The information contained in this message is intended only for the
personal and confidential use of the recipient(s) named above. If
the reader of this message is not the intended recipient or an
agent responsible for delivering it to the intended recipient, you
are hereby notified that you have received this document in error
and that any review, dissemination, distribution, or copying of
this message is strictly prohibited. If you have received this
communication in error, please notify us immediately, and delete
the original message.
