Hi Erik, You can do this in two ways (brief). 1. Setup server-to-server communication between the old and the new server. Do an 'export server' to get all policy information to the new server and redirect all backups to the new hardware. Do exports on all monthly/yearly and archive data to the new server. Daily backps expire.
2.Do a DB restore on the new server. Connect both the new and old library on the new server and start to 'move data' or move nodedata' from L24 to LTO. Last solution seems easiest to me. And you dont need to maintain a second server. //Henrik -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Erik Björndell Sent: den 9 maj 2006 11:31 To: [email protected] Subject: Migrating/moving data from one server to another. Hi All! We have an old IBM aix server with TSM 5.2.2 server and plan to move/migrate this to a new server and tape library. Info: Old system:F80 ibm server, TSM 5.2.2, 3575 library, L24 drives. New system: P520, TSM 5.2.x, 3582 L23 library, 2xLTO3 drives. 2,5 TB disk for stgpools and db etc. We want to migrate the old server to the new one, keeping the data but not the hardware/tapes/library. Our plan is to install a new tsm server on the new hardware and somehow copy the data for the nodes to the new, keeping all backupdata. Is the a best practise/redbook or other information available regarding this. Erik Björndell Zetup by Semcon ------------------------------------------------------------------- The information contained in this message may be CONFIDENTIAL and is intended for the addressee only. Any unauthorised use, dissemination of the information or copying of this message is prohibited. If you are not the addressee, please notify the sender immediately by return e-mail and delete this message. Thank you.
