You have a catch-22 here. You need at least 1 scratch tape to run reclamation. If you don't have any, then you have to create one.
Find your least used tape and issue a "move data <volume> stgpool=<disk pool>" to move the data to disk. When that's done, delete the volume, " del vol <volume> ", that should make it a scratch tape. Then set reclamation value on the tape pool to 90 or lower. "upd stg <tapepool> recl=90". Gerald Michalak "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> wrote on 11/29/2005 06:57:29 AM: > Hi, I´m new in TSM, I´ve 29 tapes and 2 drives, all of my tapes are > in private state, some are in filling status and others in full, if > I execute the sentence: > > select volume_name, pct_utilized, status, pct_reclaim from volumes > where pct_utilized < 20 > > I get > > VOLUME_NAME PCT_UTILIZED STATUS PCT_RECLAIM > ------------------ ------------ ------------------ ----------- > DYI502 0.0 FILLING 0.0 > DYI508 4.7 FILLING 38.5 > DYI511 12.0 FILLING 33.0 > DYI513 9.1 FILLING 34.4 > DYI515 9.9 FILLING 26.7 > FZW939 6.7 FILLING 36.8 > FZW941 2.4 FULL 97.5 > FZW943 0.7 FULL 99.2 > FZW945 16.2 FULL 89.1 > FZW947 14.7 FULL 89.4 > > I need to make some space but the reclamation process didn´t free > some space, I´ve executed move data command but one of the drives shows > > ANR8376I Mount point reserved in device class DC-SUNL1000, status: RESERVED > > When I execute q mount command. > > How could I get some scratch tapes as soon as possible? > > Thanks in advance. > > > Marcelo.
