You need to define the paths for the library client on the library manager:
LIBMGR = Library Manager LIBCLT = Library Client (as defined on DEF SERVER) LIBMGR>def path LIBCLT DRIVEX srctype=server desttype=drive library=LIBRARYNAME device=/dev/your_device_as_see_by_libclient_operating_system Then you create a device class on library client poiting to the shared library LIBCLT>def devc CLASSNAME library=LIBRARYNAME devtype=DEVTYPE format=FORMAT mountlimit=DRIVES > On 11/24/05, Meadows, Andrew <[EMAIL PROTECTED]> wrote: > > > > Ok I am attempting to install a second TSM server with a shared 3584 > > library and I need some help. Heres the config. > > > > Server A aix 5.1 tsm server 5.3.1.6 fiber connection to library > > Server B same as above. > > > > I have set up server to server communications and was able to set up the > > library on the second server. However I cannot define drives. I am > > following the redbook walkthrough on this and they say to do a def drive > > libname drivename. When I do this though I get > > > > tsm: NA_TSM_CRIT>def drive 3584a drive01 > > ANR8403E DEFINE DRIVE: Operation not allowed for SHARED libraries. > > ANS8001I Return code 3.. > > > > Is there something I am missing. I know server to server com is > > working... > > > > If I try to def path of course it says drive 01 is not defined.... > > > > Thanks in advance, > > Andrew > > ******************************************** > > This message is intended only for the use of the Addressee and > > may contain information that is PRIVILEGED and CONFIDENTIAL. > > > > If you are not the intended recipient, you are hereby notified > > that any dissemination of this communication is strictly prohibited. > > > > If you have received this communication in error, please erase > > all copies of the message and its attachments and notify us > > immediately. > > > > Thank you. > > ******************************************** > > > -- Helder Garcia