You have to set the FORMAT= in the devclass to ULTRIUMC and LTO-1 and ULTRIUM3C for the LTO-3 if you want to keep them separate. Then you define a stgpool for the LTO3 devclass. The only gotcha I found was trying to do a move data from the LTO-1 stgpool to the LTO-3 stgpool. It just sat there waiting for a mountpoint in the LTO-3 devclass. Never moved. Opened a PMR, did some traces and found out that the issue is to complex to fix in the device allocation algorithm, so they're chaning the documentation to state that "true" mixed media support is only fully supported if you partition the library. NOT a solution in my opinion.
Bill Boyer "Some days you're the bug, some days you're the windshield" - ?? -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of goc Sent: Wednesday, August 03, 2005 10:44 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: LTO1 / LTO3 mixing hi, thanks for answering, i it somehow clear to me, but you can change the "RECORDING FORMAT" on device class properties so this is confusing me ... thanks again goran ----- Original Message ----- From: "Henrik Wahlstedt" <[EMAIL PROTECTED]> To: <ADSM-L@VM.MARIST.EDU> Sent: Wednesday, August 03, 2005 3:39 PM Subject: Re: LTO1 / LTO3 mixing Hi, I would say yes, since a device class contains device type and format. //Henrik -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of goc Sent: 3. august 2005 13:45 To: ADSM-L@VM.MARIST.EDU Subject: LTO1 / LTO3 mixing hi all, just a quick one, when mixing LTO1 and LTO3 drives do i need to make a new device class for LTO3 drives ? i mean ... confused ... how TSM knows that LTO1 tape must put into LTO1 drive if he wants to write onto that tape ... BIG thanks for any answer goran konjich vipnet ------------------------------------------------------------------- The information contained in this message may be CONFIDENTIAL and is intended for the addressee only. Any unauthorised use, dissemination of the information or copying of this message is prohibited. If you are not the addressee, please notify the sender immediately by return e-mail and delete this message. Thank you.
