Include both lto1 and lto2 in the same tape pool showing the same capacity. The lto1's will still write at their capacity. In transitioning to lto2 just manually mark the lto1's read only and later destroyed. This will allow you to eventually be all lto2's if that is what you wish to transition to.
Jim Skinner Information Technology Systems Mail Stop 4022 Kansas University Hospital 3901 Rainbow Blvd Kansas City KS 66160 913-588-4787 >>> [EMAIL PROTECTED] 7/3/2005 4:26:51 PM >>> Hi David, In a perfect world I would been able to give the volume range to use. In this world some one ordered the LTO2 tapes with labels in the same range as our LTO1 tapes. Because we asked for 400 tapes, they ordered 200, so we are forced to use our LTO1 tapes in this LTO2 partition. Quick fix, we use the L1/L2 to be out of harms way. So, even if this wonder boy will be the one ordering the LTO3 tapes, it will not hurt us.... Regards, Karel -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of David Longo Sent: zondag 3 juli 2005 23:00 To: ADSM-L@VM.MARIST.EDU Subject: Re: Label reading problems 3584 library We only use the first 6 chars. Have no problem knowing what type of tape it is in TSM because... I specifically order tapes with certain prefixes. Class Volser start LTO1 A00000 LTO2 B00000 LTO3 C00000 You can use others for what is most useable to you. Oh someone may ask, what about WORM LTO3 tapes now? Volser start WC0000, "W" for WORM! Just a little idea! David B. Longo System Administrator Health First, Inc. 3300 Fiske Blvd. Rockledge, FL 32955-4305 PH 321.434.5536 Pager 321.634.8230 Fax: 321.434.5509 [EMAIL PROTECTED] >>> [EMAIL PROTECTED] 07/03/05 1:17 PM >>> Hi Richard, Thanx! For some reason, I'm still rather new to AIX, Smit(ty) didn't let me change this option. Now it is set to 8. The reason we like to see the L1/L2/L3 part of the label. Regards, Karel -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Richard Sims Sent: zondag 3 juli 2005 15:45 To: ADSM-L@VM.MARIST.EDU Subject: Re: Label reading problems 3584 library Importance: High Hi, Karel - The IBM TotalStorage Tape Device Drivers: Programming Reference manual defines the low-level ingredients of tape processing, and there the volser storage field can accommodate 8 chars. In looking at the Atape.fixlist file, I note level entry: 9.2.9.0 Add SMIT option to set 3584 TSM barcode length for Ultrium 1/2 media You might look into your AIX SMIT and see if yours presents that capability. Note, however, that it is best to use six characters, as per the TSM Implemenation Guide redbook: "Although IBM Tivoli Storage Manager allows you to use a volume identification longer than six characters, we strongly recommend that you use up to six alphanumeric characters for the label (also known as VOLSER or Volume ID). This should be compatible with other ANSI styled label systems.". (The first 6 chars of the label are the volser/volid, the last 2 are the media identifier, per "IBM LTO Ultrium Cartridge Label Specification", IBM site item S7000429.) Richard Sims On Jul 3, 2005, at 6:42 AM, Bos, Karel wrote: > Hi, > > We have expanded our 3584 library with one frame and partitioned the > library into 2 logical libraries. One of these partitions is use by > our "old" wintel ITSM environment, the other is for our new AIX ITSM > server. > > > The wintel ITSM servers are reading all the 8 characters of the LTO > labels, the AIX server doesn't read more than 6 characters. > > >> From the documentation of the 3584 library, it sounds like you turn >> on >> > or off this 6 character feature for the total library and all > connected servers. So the problem must be in AIX and possible the > Atape driver, right? > >> From Google searches, IBM website and so on, I cannot find any >> related >> > info on how to tell AIX to read all 8 characters of the barcode, so it > should be the library.. Right?? > > Please, anyone can solve this and tell me where I am going wrong? > > Wintel ITSM server 5.2.4.1 : 000001L1 > AIX ITSM server 5.3.1.2: 000006 > > > Regards, > > Karel > ############################################################## This message is for the named person's use only. It may contain confidential, proprietary, or legally privileged information. No confidentiality or privilege is waived or lost by any mistransmission. If you receive this message in error, please immediately delete it and all copies of it from your system, destroy any hard copies of it, and notify the sender. You must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message if you are not the intended recipient. Health First reserves the right to monitor all e-mail communications through its networks. Any views or opinions expressed in this message are solely those of the individual sender, except (1) where the message states such views or opinions are on behalf of a particular entity; and (2) the sender is authorized by the entity to give such views or opinions. ##############################################################
