Not sure if this what you can use.. in TSM for stgpool there is an option
called Migration Delay. Basically it allow you to control how long the
data to remain in the storage pool before data migrates. I am thinking
this could save you some time during "meltdown."
It's in the Admin manual Chapter 9. Managing Storage Pools and Volumes if
you would like to look up.
Migration Delay (primary storage pools only)
The minimum number of days that a file must remain in a storage pool
before the server can migrate the file to the next storage pool. For a
disk storage pool, the days are counted from the time that the file
was
stored in the storage pool or last retrieved by a client. For a
sequential access storage pool, the days are counted from the time
that
the file was stored in the storage pool.
Thanks,
Sung Y. Lee
"ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> wrote on 06/08/2005
06:59:03 PM:
> All,
>
> First time poster, fairly new to the whole thing, so help much
appreciated.
>
> We've got a TSM server on which we've just upgraded the disk array, from
1TB
> to 2TB. It also has a Spectralogic Treefrog unit with two AIT2 drives and
a
> 15-slot robot.
>
> We're looking to keep the current generation of files from our main file
> server in the diskpools, so that we (in the event of a meltdown of the
> fileserver) won't have to resort to tape. The amount of storage on the
file
> server is roughly 1TB - the other servers are only a small fraction of
that.
>
> We've kept the old diskpools, and created new ones to catch new data.
>
> The file server currently has its storage divided into two partitions.
I'm
> reconfiguring the array on the file server to add space, and I'm going to
> switch to a single large partition, and change the drive letter so that
the
> TSM server will pick up all of the files on the reconfigured array as
new.
> (I've got a copy of the data on a test machine, done with robocopy, to
> retain all of the ACL information, and will be copying the data back
after
> the production file server is reconfigured.)
>
> Is there some way 1) to fix those files in their diskpools, or 2) get
> notification if they start to migrate to tape and/or 3) get notification
if
> space in the diskpools is such that files from the file server are likely
to
> migrate to tape?
>
> The version for TSM shown at the CLI interface is "Version 5, Release 1,
> Level 5.0".
>
> Thanks,
>
> Kurt Buff
> Sr. Network Administrator
> Zetron, Inc.
> [EMAIL PROTECTED]
