Drive path defined correctly, i see him in tapelist output.
In "IBM TotalStorage Tape Device Drivers Installation and Userâs Guide", in
Solaris section writed about /dev/rmt/*st - drives, configured witg IBMtape.
-----ÐÑÑÐÐÐÐÐ ÑÐÐÐÑÐÐÐÐ-----
ÐÑ: ADSM: Dist Stor Manager ÐÑ ÐÐÐÐÐ Andreas Almroth
ÐÑÐÑÐÐÐÐÐÐ: ÐÑ 17.05.2005 20:41
ÐÐÐÑ: ADSM-L@VM.MARIST.EDU
ÐÐÐÐÑ:
ÐÐÐÐ: Re: LAN-free on Solaris 8
Perhaps you swapped the two paths? I have had similar when by mistake
creating the path to the wrong /dev/rmt device.
Also, are you sure you should use st devices and not mt devices? The IBM
drivers install mt devices, and you will have to unload the st and sgen
kernel modules before add_drv of mt module.
/Andreas
Chernyaev Sergey wrote:
>Hello.
>
>I have trouble with LAN-free on Solaris 8 (fujitsu primepower 250, HBA
Emulex)
>Some time ago i configure LAN-free, all worked fine. Then admin
install Solaris another time, and after this moment on server live 2
installations of OS - old and new. I install on new Solaris latest IBMtape
drivers, TSM BA 5.2.4, IBM STA 5.2.4, configure tape paths. Then i run "dsmc
incr" and in TSM log see:
>
>
>ANR8337I LTO volume 000052L2 mounted in drive IBM3582DRIV-
> E1 (mt0.0.0.1). (SESSION: 1075)
>05/17/2005 20:14:55 ANR0409I Session 1075 ended for server
STA_GERMAN (Solaris
> 8/9 ). (SESSION: 1075)
>05/17/2005 20:14:55 ANR0409I (Session: 1069, Origin: STA_GERMAN)
Session 10
> ended for server BLACK_SERVER1 (Windows).
(SESSION: 1069)
>05/17/2005 20:14:55 ANR8302E (Session: 1069, Origin: STA_GERMAN)
I/O error on
> drive IBM3582DRIVE1 (/dev/rmt/3st) (OP=READ,
Error
> Number=5, CC=0, KEY=00, ASC=00, ASCQ=00,
SENSE=70.00.00.-
>
00.00.00.00.1C.00.00.00.00.00.00.00.00.00.00.00.00.00.01-
>
.30.30.30.30.35.32.4C.00.00.00.06.38.00.01.00.00.00.00.0-
>
0.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.-
>
00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00-
>
.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.0-
>
0.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.-
>
00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.01.00.00-
>
.00.01.00.00.00.50.00.00.00.04.00.00.00.00.02.7D.36.1C.0-
>
2.7D.36.1C.02.7D.36.1C.02.7D.36.1C.00.00.00.00.00.00.00.-
>
00.02.C5.D0.4C.F6.80.E6.44.F6.80.E5.F4.F6.80.E5.A4.F6.80-
>
.E5.54.F6.80.E5.50.F6.80.E4.C8.01.1C.D1.C4.00.00.00.00.0-
>
2.C5.D0.4C.F6.80.E4.9C.00.00.00.20.F6.80.E4.BC.00.00.00.-
>
00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00-
> .00.00.00.00.00.00.00.00.00, Description=An
undetermined
> error has occurred). Refer to Appendix D in the
> 'Messages' manual for recommended action.
(SESSION: 1069)
>05/17/2005 20:14:55 ANR8355E (Session: 1069, Origin: STA_GERMAN)
I/O error
> reading label for volume 000052L2 in drive
IBM3582DRIVE1
> (/dev/rmt/3st). (SESSION: 1069)
>05/17/2005 20:14:55 ANR0408I Session 1076 started for server
STA_GERMAN
> (Solaris 8/9 ) (Tcp/Ip) for library sharing.
(SESSION:
> 1076)
>05/17/2005 20:14:55 ANR0408I (Session: 1069, Origin: STA_GERMAN)
Session 11
> started for server BLACK_SERVER1 (Windows)
(Tcp/Ip) for
> library sharing. (SESSION: 1069)
>05/17/2005 20:14:55 ANR0409I Session 1076 ended for server
STA_GERMAN (Solaris
> 8/9 ). (SESSION: 1076)
>05/17/2005 20:14:55 ANR0409I (Session: 1069, Origin: STA_GERMAN)
Session 11
> ended for server BLACK_SERVER1 (Windows).
(SESSION: 1069)
>05/17/2005 20:14:55 ANR0530W Transaction failed for session 1073 for
node
> GERMAN (SUN SOLARIS) - internal server error
detected.
> (SESSION: 1073)
>05/17/2005 20:14:55 ANR1401W (Session: 1069, Origin: STA_GERMAN)
Mount
> request denied for volume 000052L2 - mount
failed.
> (SESSION: 1069)
>------------------------
>In /var/adm/messages:
>May 17 21:24:52 german <IBM Ultrium Gen 2 LTO>
>May 17 21:24:52 german scsi: [ID 193665 kern.info] st21 at lpfc1:
target 0 lun 0
>May 17 21:24:52 german genunix: [ID 936769 kern.info] st21 is /[EMAIL
PROTECTED],2000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
>May 17 21:30:11 german IBMtape: [ID 243001 kern.warning] WARNING:
IBMtape( 96) io_start: Auto-request sense failed.
>
>
>What's i can do?
>
>
>
