Thank you for the advice. I'm going to do this tomorrow. : )
********************************
Joni Moyer
Highmark
Storage Systems
Work:(717)302-6603
Fax:(717)302-5974
[EMAIL PROTECTED]
********************************
"Sung Y Lee"
<[EMAIL PROTECTED]
OM> To
Sent by: "ADSM: ADSM-L@VM.MARIST.EDU
Dist Stor cc
Manager"
<[EMAIL PROTECTED] Subject
.EDU> Fw: disaster recovery drill:
emergency!!!
03/07/2005 05:27
PM
Please respond to
"ADSM: Dist Stor
Manager"
<[EMAIL PROTECTED]
.EDU>
When you define the path, don't you need to have the device path? Since
the library is manual you don't have device to define..?
Now I am not sure if this applies to LTO, but I believe it does. I took
this example and tried to create devconfig file.
In TSM 5.2 Admin manual page 105 describes how to configure manual DLT
drives
Define the Device to IBM Tivoli Storage Manager\
1. Define a manual library named MANUALDLT:
define library manualdlt libtype=manual
2. Define the drives in the library:
define drive manualdlt drive01
define drive manualdlt drive02
3 Define path
Define a path from the server to each drive:
define path server1 drive01 srctype=server desttype=drive library=manualdlt
device=/dev/mt1
define path server1 drive02 srctype=server desttype=drive library=manualdlt
device=/dev/mt2
4define devclass
define devclass tapedlt_class library=manualdlt devtype=dlt format=drive
so does that mean device configuration file would look like... for LTO
simply replace the devtype to LTO.
/* Device Configuration */
DEFINE DEVCLASS TAPEDLT_CLASS DEVTYPE=DLT FORMAT=DRIVE MOUNTLIMIT=DRIVES
MOUNTWAIT=10 MOUNTRETENTION=10 PREFIX=ADSM LIBRARY=MANUALDLT
SET SERVERNAME SERVER1
DEFINE LIBRARY MANUALDLT LIBTYPE=MANUAL
DEFINE DRIVE MANUALDLT DRIVE01 ONLINE=YES
DEFINE DRIVE MANUALDLT DRIVE02 ONLINE=YES
DEFINE PATH SERVER1 DRIVE01 SRCTYPE=SERVER DESTTYPE=DRIVE LIBRAR=MANUALDLT
DEVICE=/DEV/RMT1
DEFINE PATH SERVER1 DRIVE01 SRCTYPE=SERVER DESTTYPE=DRIVE LIBRAR=MANUALDLT
DEVICE=/DEV/RMT2
Sung Y. Lee
Enterprise Storage Services
Veritas Certified Data Protection Administrator
IBM Global Services, Service Delivery Center - South
Office (770) 663-9269 T/L 564-9269
Pager ( 800) 759-8888 PIN: 1087116
E-mail [EMAIL PROTECTED]
Web www.ibm.com
----- Forwarded by Sung Y Lee/Austin/IBM on 03/07/2005 05:21 PM -----
"ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> wrote on 03/07/2005
05:09:21 PM:
> Your 'define drive' commands need to reference the library they're in;
> FWIW, here's mine:
>
> DEFINE DEVCLASS NIBLTO DEVTYPE=LTO FORMAT=DRIVE MOUNTLIMIT=DRIVES
> MOUNTWAIT=60 MOUNTRETENTION=60 PREFIX=ADSM LIBRARY=ALEX
> SET SERVERNAME ADSM
> DEFINE LIBRARY ALEX LIBTYPE=MANUAL
> DEFINE DRIVE ALEX DRIVE_01 ONLINE=Yes
> DEFINE PATH ADSM ALEX SRCTYPE=SERVER DESTTYPE=LIBRARY ONLINE=YES
> DEFINE PATH ADSM DRIVE_01 SRCTYPE=SERVER DESTTYPE=DRIVE LIBRARY=ALEX
> DEVICE=/dev/rmtX ONLINE=YES
>
> And the 'define path' for the drive is all one line. I've actually got
> this set up as my D/R device config file that I load from floppy just
> before the database restore. Saves editing on-site.
>
> Tom Kauffman
> NIBCO, Inc
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
> Joni Moyer
> Sent: Monday, March 07, 2005 4:53 PM
> To: ADSM-L@VM.MARIST.EDU
> Subject: Re: disaster recovery drill: emergency!!!
>
> Hi Tom,
>
> Gotcha! So I guess my devconfig file could look like this. And then
> when
> it's up and it has restored the TSM server it will have the identical
> definitions as I have at home and then I will just define more manual
> drives, the paths to the drives and move from there? If I leave the
> other
> definitions there after the TSM DB restore, will conflicts occur? Thank
> you again!
>
> DEFINE DEVCLASS DR_LTO2 DEVTYPE=LTO FORMAT=ULTRIUM2C
> ESTCAPACITY=209715200K MOUNTLIMIT=DRIVES MOUNTWAIT=60
> MOUNTRETENTION=5 PREFIX=ADSM LIBRARY=DRLIB
> DEFINE DEVCLASS NASDEV DEVTYPE=NAS FORMAT=DRIVE
> ESTCAPACITY=209715200K MOUNTLIMIT=DRIVES MOUNTWAIT=180
> MOUNTRETENTION=0 PREFIX=ADSM LIBRARY=DRLIB
> SET SERVERNAME TSMPROD
> SET SERVERPASSWORD 1829fecd5fecda74
> DEFINE LIBRARY DRLIB LIBTYPE=MANUAL
> DEFINE DRIVE LTO1
> DEFINE DRIVE LTO6
> DEFINE PATH TSMPROD LTO1 SRCTYPE=SERVER DESTTYPE=DRIVE
> LIBRARY=DRLIB
> DEVICE=/DEV/RMT#
> DEFINE PATH NAS_SERVER_2 LTO6 SRCTYPE=DATAMOVER DESTTYPE=DRIVE
> LIBRARY=DRLIB DEVICE=C64T0LO
>
>
>
>
> ********************************
> Joni Moyer
> Highmark
> Storage Systems
> Work:(717)302-6603
> Fax:(717)302-5974
> [EMAIL PROTECTED]
> ********************************
>
>
>
> "Kauffman, Tom"
> <[EMAIL PROTECTED]
> COM>
> To
> Sent by: "ADSM: ADSM-L@VM.MARIST.EDU
> Dist Stor
> cc
> Manager"
> <[EMAIL PROTECTED]
> Subject
> .EDU> Re: disaster recovery drill:
> emergency!!!
>
> 03/07/2005 04:35
> PM
>
>
> Please respond to
> "ADSM: Dist Stor
> Manager"
> <[EMAIL PROTECTED]
> .EDU>
>
>
>
>
>
>
> Would you believe -- both?
>
> Until the TSM database is restored and TSM started, you live off the
> device config file; after the restore, you live off the definition in
> the TSM database.
>
> So -- change the device config file -- I usually go with a one-drive
> manual library, as that's all I need to get the database restore
> running. Once the database is restored, start TSM and make any changes
> required to drives/paths/libraries. I've found it simpler to just delete
> everything and then re-define to match the D/R environment.
>
> Tom Kauffman
> NIBCO, Inc
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
> Joni Moyer
> Sent: Monday, March 07, 2005 4:14 PM
> To: ADSM-L@VM.MARIST.EDU
> Subject: disaster recovery drill: emergency!!!
>
> Hey All!
>
> I'm going to do a DR pre-test to see what I need to do concerning the
> devconfig file. I currently have an External and ACSLS library
> configured
> with LTO2 tape drives, the device classes, paths, etc. When I go to DR
> I
> will have just the drives attached to the server. My question is:
> before
> I issue the dsmserv restore command to restore the TSM server from a
> dbbackup, do I want to delete all references to the home TSM
> configuration
> and add the manual library, device class and paths or do I do
> delete/update/add the configuration changes to the server after? I
> have
> everything planned out using my DRM plan, but this is the only portion
> of
> the plan that I am unsure of the order of operations. Thank you in
> advance!
>
> ********************************
> Joni Moyer
> Highmark
> Storage Systems
> Work:(717)302-6603
> Fax:(717)302-5974
> [EMAIL PROTECTED]
> ********************************
