Hi all At the moment our IBM 3494 tape library with 2 internal 3590 H1A tape drives is used by just one TSM server ( running Solaris 2.7 ). But, in the near future I am being asked to make it available for use by another server ( BRMS running on an AS400 ). This is something I know very little about, but am aware that it has something to do with categories within the tape library. So only one server will have access to category 'a' while another will access category 'b' for example ( at least I think it's as simple as that ). But I do not understand exactly where these categories are defined and how to tell TSM not to use volumes of category 'b' for example. I am not worrying about the BRMS side of things as this will be dealt with by another department.
Can anyone point me in the direction for some good resources on this and indeed can anyone who already does this give me any advice. Many thanks in advance All the best Farren Minns John Wiley & Sons Ltd ###################################################################### The information contained in this e-mail and any subsequent correspondence is private and confidential and intended solely for the named recipient(s). If you are not a named recipient, you must not copy, distribute, or disseminate the information, open any attachment, or take any action in reliance on it. If you have received the e-mail in error, please notify the sender and delete the e-mail. Any views or opinions expressed in this e-mail are those of the individual sender, unless otherwise stated. Although this e-mail has been scanned for viruses you should rely on your own virus check, as the sender accepts no liability for any damage arising out of any bug or virus infection. ######################################################################
