As the install would need to know the device files for drives as seen from the StoargeAgent host to define the paths, I would expect that the upgrade will not do the conversion for you. The DRIVE definitions are still required by TSM and they will be kept... so that saves a little bit of typing?!
Matt. _-'-_ -|- -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of David E Ehresman Sent: Thursday, February 03, 2005 4:05 PM To: [email protected] Subject: TSM 4.2.4 -> 5.2.4 I'm looking at a AIX server upgrade from TSM 4.2.4 to 5.2.4 with TSM EE and TSM for SAN. All clients are AIX or Linux. The ilbrary is a 3584 with 4 LTO1 drives. Anything to watch out for? Does the upgrade automatically convert DRIVE definitions into PATH/DRIVE definitions or do the PATH defs have to be added manually? ___________________________ Disclaimer Notice __________________________ This message and any attachments are confidential and should only be read by those to whom they are addressed. If you are not the intended recipient, please contact us, delete the message from your computer and destroy any copies. Any distribution or copying without our prior permission is prohibited. Internet communications are not always secure and therefore Powergen Retail Limited does not accept legal responsibility for this message. The recipient is responsible for verifying its authenticity before acting on the contents. Any views or opinions presented are solely those of the author and do not necessarily represent those of Powergen Retail Limited. Registered addresses: Powergen Retail Limited, Westwood Way, Westwood Business Park, Coventry, CV4 8LG. Registered in England and Wales No: 3407430 Telephone +44 (0) 2476 42 4000 Fax +44 (0) 2476 42 5432
