Thanks Dave, I Thought you needed to be at ML2 for Aix 5.2? to install TSM 5.3 although I guess it doesn't matter because we are at ML4 so we should be ok for TSM 5.3 and the Admin Center.
Dave Canan wrote: > I agree, this is confusing. Let me see if I can list the requirements > here: > > AIX 5.2, 32-bit - devices.common.IBM.fc.hba-api 5.2.0.30 or higher > AIX 5.2 64-bit - devices.common.IBM.fc.hba-api > 5.2.0.30 (ML4 > or higher) > > AIX 5.3 32-bit - devices.common.IBM.fc.hba-api 5.3.0.0 (base level) > AIX 5.3 64-bit - devices.common.IBM.fc.hba-api 5.3.0.10 > > Also, in answer to your question regarding AIX 5.2 level for TSM > 5.3, you must be at release level 52f, which is the same as maintenance > level 3. > > At 01:06 PM 1/28/2005 -0500, you wrote: > >Does anyone know the correct fileset required to use San Discovery for > >TSM V5.3? > >(devices.common.IBM.fc.hba-api required) for AIX 5.2. > >I read in the TSM supported HBAs for San Device maping > >technote that it's 5.2.0.50. > > > >But I read in the ITSM,server & Storage Agent v5.3.0 readme > >where it said later than 5.2.0.30 for 64-bit. We are at 5.2.0.40. > > > >I also understand that 5.2.0.30 for 64-bit. Has the error. > >Does anyone know where else I can look on the IBM site > >to check for any errors on filesets? > > > >Also, Just to be sure what maintenance level does TSM 5.3 > >require for Aix 5.2. I believe it's ML2 we are at ML 4 so > >I assume we are ok and no apar is needed. > > > >Thanks for any help in advance > > > >Config > > > >TSM 5.2.3.1 & 5.2.3.5 > >AIX 5.2 Maintenance level 4 > >pseries 670 > > Dave Canan > TSM Performance > IBM Advanced Technical Support > [EMAIL PROTECTED]
