..I'm glad to hear. I use a suite of python scripts that ive put together / migrated from other shells over the last 5 years or more. I would be frustrated if dsmadmc dissappeared...
Is this a possibility for future release? _-'-_ -|- -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Stef Coene Sent: Wednesday, January 05, 2005 9:10 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: ISC on WinXP or Unix On Wednesday 05 January 2005 08:16, Richard van Denzel wrote: > Stef, > > I totally concur with you. I also use quite a lot of (ksh) scripts and I > don't feel like throwing them overboard, especially because the guys are > our servicedesk do the tapehandling and they have little knowledge of TSM. One good thing, dsmadmc is still available and supported. So your scripts will work with 5.3. Stef ___________________________ Disclaimer Notice __________________________ This message and any attachments are confidential and should only be read by those to whom they are addressed. If you are not the intended recipient, please contact us, delete the message from your computer and destroy any copies. Any distribution or copying without our prior permission is prohibited. Internet communications are not always secure and therefore Powergen Retail Limited does not accept legal responsibility for this message. The recipient is responsible for verifying its authenticity before acting on the contents. Any views or opinions presented are solely those of the author and do not necessarily represent those of Powergen Retail Limited. Registered addresses: Powergen Retail Limited, Westwood Way, Westwood Business Park, Coventry, CV4 8LG. Registered in England and Wales No: 3407430 Telephone +44 (0) 2476 42 4000 Fax +44 (0) 2476 42 5432
