Timothy yes, you can use this command on the tsm server command line!
Christian Demnitz Timothy Hughes <[EMAIL PROTECTED]> Gesendet von: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> 08.11.2004 15:15 Bitte antworten an "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> An [EMAIL PROTECTED] Kopie Thema Re: Antwort: Re: Antwort: How would I check to see if files are on tapealready? Christian, Can enter this command on the server command line? Christian Demnitz wrote: > ok, try this: > > select file_name from contents where node_name='xxx' > > Christian Demnitz > > Timothy Hughes <[EMAIL PROTECTED]> > Gesendet von: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> > 08.11.2004 14:42 > Bitte antworten an > "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> > > An > [EMAIL PROTECTED] > Kopie > > Thema > Re: Antwort: How would I check to see if files are on tape already? > > I don't know what tape the files are on but I know > the node? Sorry for the lack of Information. > > Thanks > > Christian Demnitz wrote: > > > q content <vol_name> > > or > > select * from contents (select xxx from contents where "vol_name"="xxx") > > and so on! > > > > but be carefully! takes very long time, shows every file on this tape! > > > > Christian Demnitz > > > > Timothy Hughes <[EMAIL PROTECTED]> > > Gesendet von: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> > > 08.11.2004 14:16 > > Bitte antworten an > > "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> > > > > An > > [EMAIL PROTECTED] > > Kopie > > > > Thema > > How would I check to see if files are on tape already? > > > > How would I check to see if files are on tape already? > > Using TSM. > > > > Thanks in advance
