Hi Justin, Select mediatype,count(*) from libvolumes group by mediatype
Then.. you will need to know which mediatype is which. Matt. _-'-_ -|- -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Justin Case Sent: Tuesday, October 26, 2004 3:10 PM To: [EMAIL PROTECTED] Subject: select cmd question We have a mixed tapes in our 3494 library we have 3590 20Gb tape (shorts) and we have 3590 extended tapes and I need to make a count of the 3590 20Gb tapes, my question is there a select cmd to an mtlib cmd that would return the count of the 3590 20Gb tape even if they are in use or scratch tapes ? Thanks Justin ___________________________ Disclaimer Notice __________________________ This message and any attachments are confidential and should only be read by those to whom they are addressed. If you are not the intended recipient, please contact us, delete the message from your computer and destroy any copies. Any distribution or copying without our prior permission is prohibited. Internet communications are not always secure and therefore Powergen Retail Limited does not accept legal responsibility for this message. The recipient is responsible for verifying its authenticity before acting on the contents. Any views or opinions presented are solely those of the author and do not necessarily represent those of Powergen Retail Limited. Registered addresses: Powergen Retail Limited, Westwood Way, Westwood Business Park, Coventry, CV4 8LG. Registered in England and Wales No: 3407430 Telephone +44 (0) 2476 42 4000 Fax +44 (0) 2476 42 5432
