Eliza,

Why not 

Yr1
Convert one D12 to D22. Replace 2x 3590 with 3592

Yr2 
Replace 2x3590 with 3592.  This is possible because a D22 holds twice the drive 
density of a D12

Yr3
Given that the 3592 is faster than the 3590, it may not be necessary to add more 
3592s.  Just remove the remaining 3590s, and replace with bare slots.  If you do 
decide to add more 3592 drives, add them into the D22 frame rather than converting 
another one.


Regards

Steve 

Steve Harris
AIX and TSM Admin
Queensland Health, Brisbane Australia





>>> [EMAIL PROTECTED] 23/10/2004 1:53:51 >>>
We have a 3494 tape library with six 3590E drives.
I am looking into upgrading the 3590E drives to 3592 drives.

current setup:
TSM server 5.2.3.3 on AIX 5.2
3494 with 3 frames: one L12 and two D12s
six 3590E tape drives
server and 3590E drives connected to two 2109 SAN switches.

Because of budget constrains I am thinking of replacing a frame and
two 3590E drives at a time and spread out the cost over 3 years.

Can someone give me a rough cost estimate before I even propose it.
Is there anything I missed in the following 3yr plan?

Year 1:
convert the frame L12 to L22
replace two 3590E with 3592
300 new 2592 tapes

Year 2 and 3:
convert the frame D12 to D22
replace two 3590E with 3592
300 new 2592 tapes

Thanks,
Eliza Lau
Virginia Tech Computing Center
1700 Pratt Drive
Blacksburg, VA 24060



***********************************************************************************
This email, including any attachments sent with it, is confidential and for the sole 
use of the intended recipient(s).  This confidentiality is not waived or lost, if you 
receive it and you are not the intended recipient(s), or if it is transmitted/received 
in error.

Any unauthorised use, alteration, disclosure, distribution or review of this email is 
prohibited.  It may be subject to a statutory duty of confidentiality if it relates to 
health service matters.

If you are not the intended recipient(s), or if you have received this email in error, 
you are asked to immediately notify the sender by telephone or by return email.  You 
should also delete this email and destroy any hard copies produced.
***********************************************************************************

Reply via email to