Yes I have. define libr define drive (12 times)
define path for libman to libr define path for libman to drives (12 times) define path for libclient-solaris to drives (12 times) -> working fine define path for libclient-linux to drives (12 times) -> unable to mount anything On Tue, 17 Aug 2004 10:52:12 -0500, Davidson, Becky <[EMAIL PROTECTED]> wrote: > Did you define a path on the library manager for the library client? > On manager you > Define drive libname drive > Define path libman drive srct=serv destt=drive libr=libname > devi=whateverdevicenameis > Define path libclient drive srct=serv destt=drive libr=libname > devi=whateverdevicenameis > > > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of > Gilles > Sent: Tuesday, August 17, 2004 9:48 AM > To: [EMAIL PROTECTED] > Subject: Howto define path in a library sharing env. > > Hi, > > In a library sharing env. with the library manager [5.1.9.3] running on > Solaris8 and the library clients [5.1.9.3] running on various OS (Solaris8 & > Linux) how do I have to define the PATH to the library [IBM3584] ? only once > ? > > With n Solaris8 library clients the path to the library is only defined once > on the library manager (working fine). Later I introduced a Linux library > client. Server to server communication is working fine but I'm unable to > mount tape volumes from it (path to drives are defined). I checked with > IBMtapeutil the library & the drives and everything is working fine. > > I'm out of ideas, so suggestions are more than welcome. >
