Hi,
Have just had to delete both the paths and drives which we use for
TSM backups on an IBM3584 tape library because of issues regarding drives
not being defined to use LTO2 tapes. Once successfully deleted the drives
and paths were re-defined in the correct order. However upon redeining the
drives thay all appear to have a drive status of unknown. Does anyone know
why this happens and more importantly how to rectify this so the drives
actually shown their correct state i.e empty or loaded. Will a reboot of
the server clear this issue up ?
Any help would be appreciated
==============================================================================
This communication, together with any attachments hereto or links contained herein, is
for the sole use of the intended recipient(s) and may contain information that is
confidential or legally protected. If you are not the intended recipient, you are
hereby notified that any review, disclosure, copying, dissemination, distribution or
use of this communication is STRICTLY PROHIBITED. If you have received this
communication in error, please notify the sender immediately by return e-mail message
and delete the original and all copies of the communication, along with any
attachments hereto or links herein, from your system.
==============================================================================
The St. Paul Travelers e-mail system made this annotation on 06/16/2004, 10:16:08 AM.
