Do you use the 3583 only for TSM? Did it work in the past? If this is a one-time thing, power the library off and on again. I've only had it happen once, and a power off fixed it.
If it continues and you are attached to a WINDOWS host, check to make sure the Windows RSM service is disabled. If not, disable it and reboot Windows. -----Original Message----- From: Copperfield Adams [mailto:[EMAIL PROTECTED] Sent: Friday, June 11, 2004 5:45 AM To: [EMAIL PROTECTED] Subject: Prevent/Allow Media Removal - 3583 Hi all, The I/O station in our 3583 has become permanently locked meaning I have to take the library offline and open the entire door to insert or remove volumes. I have done a bit of research and have found this pdf: http://www-900.ibm.com/cn/support/library/storage/download/3583%20SCSI%2 0reference%20.pdf <http://www-900.ibm.com/cn/support/library/storage/download/3583%20SCSI% 20reference%20.pdf> (Page 68) which states that: Prevent: The Prevent bit indicates the following: 0 allows the opening of the I/O station. 1 prevents the opening of the I/O station. This field is applicable until a power-on reset or command reset is performed, or until all initiators have issued an ALLOW MEDIUM REMOVAL command by setting the Prevent field to 0. Does anyone know: a) How to check what the bit value currently is (presumably it is set to: 1 at the moment) b) What may have caused it and c) How to set it back so I can start using the I/O station again. Many thanks. Copperfield Adams IT Department WRC Holdings Limited [EMAIL PROTECTED] This email and any files transmitted with it are confidential and intended solely for the individual(s) or entity(s) to whom it is addressed. Any views or opinions presented or expressed herein, are those of the author(s), and may not necessarily represent those of WWAV Rapp Collins Group or it's affiliates and representatives. No representation is given nor any liability accepted for the accuracy or completeness of any information contained in this email unless expressly stated to the contrary. Neither is any liability accepted for any damage or financial or personal loss howsoever caused as a result of using the information or data contained within this email. If you are not the intended recipient(s) and/or have received this email in error, you may not use, disseminate, store, forward, print or copy it, in any method or form, either digital or otherwise. You must delete it completely from your system(s) and notify the sender that you received it, so we can ensure it does not happen again. Registered Office: 1 Riverside, Manbre Road, London UK, W6 9WA. Registered in England No. 1581935.