TSM Community : Flash 10282 has been published:
http://www-1.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/FLASH10282 Including the Flash text below : Abstract: TSM Server can not be restarted after running REPAIR STGVOL utility in 5.1.9.0 or 5.2.2.0, if a volume is not specified when the command is issued. Problem: The REPAIR STGVOL utility shipped with TSM 5.1.9.0 and TSM 5.2.2.0 may alter the TSM Server Data Base and prevent the TSM Server from being able to be restarted. Who is Affected: TSM servers, on which REPAIR STGVOL has been run without specifying a volume for the utility to repair. I.E. if this utility is run without specifying any parameters, then the symptoms referenced in PQ86959 will be experienced. TSM Servers affected by this problem will not notice the damage until the TSM Server is stopped and then attempted to be restarted, so it is possible to run with the damage to the Data Base for some time before the problem will be encountered. The fix for PQ86959 is targeted to be fixed in levels 5.1.9.2 and 5.2.2.5 of the TSM Server which should be available by May 24, 2004. Recommendation: If this utility must be run, a volume MUST be specified. If possible do not use this utility until the fix for PQ86959 is available. Here is the information from the APAR; REPAIR STGVOL utility provided with IC37275 in 5.1.9.0 can corrupt the server database and prevent the server from being restarted. If the utility command is entered without specifying a specific volume it will create an AS.Volume.Status entry for disk storage pool volumes that will cause abend0C4 during server startup. ANR9999D Trace-back of called functions: ANR9999D 0x000000010093D118 AsVolRestart ANR9999D 0x00000001009281B4 AsInit ANR9999D 0x0000000100978118 ssInit ANR9999D 0x0000000100163BD0 admStartServer ANR9999D 0x0000000100055028 main ANR9999D 0x00000001000525BC _start ANR9999D 0x0000000000000000 *UNKNOWN* Do not use the REPAIR STGVOL utility without specifying a volume. Additional keywords: Crash dump signal sig 11 segmentation violation LOCAL FIX: If this problem is encountered a point-in-time(PIT) DB restore will need to be done to a PIT prior to when the REPAIR STGVOL command was issued. -------------------------------------------------------------------------------- Classification: Software Category: Backup and Recovery Platform(s): AS/400 or IBM eServer iSeries; Cross-Platform; Intel PC; Netfinity or IBM eServer xSeries; RS/6000 or IBM eServer pSeries; OS/390 or IBM eServer zSeries S/W Pillar(s): Tivoli O/S: OS/400; AIX; HP-UX; Linux; Solaris; OS/2; Windows; MVS; OS/390; VM; z/OS Keywords: REPAIR STGVOL, IC37275, database, corrupt, ANR9999D, abend0C4, AS.Volume.Status, Crash, dump, signa, sig 11, segmentation violation, server, restarted Cordially, Sam J. Giallanza Tivoli Certified Consultant Field Issues Manager Field Input Communications (FIC) [EMAIL PROTECTED] 520.799.5512 - T/L 321.5512 Our new web Support site and KB is at : http://www-3.ibm.com/software/sysmgmt/products/support/IBMTivoliStorageManager.html
