No Damaged Files on those tapes??? Can I put it to READWRITE?
Etienne Brodeur <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
2004-04-13 11:35
Please respond to "ADSM: Dist Stor Manager"
To: [EMAIL PROTECTED]
cc:
Subject: Re: No match found...
Hi Stephan,
You should not have tapes in OFFPOOL that are unavailable and
especially not in TAPEPOOL! That means the tapes containing your data
that needs to be reclaimed is not available to TSM, since those volumes
are unavailable. If you check your activty log you'll see messages saying
'Volume XXXX required for space reclamation. Volume is unavailable'
Those tapes probably have write errors which is why they are unavaible.
You should check those 'TAPEPOOL' volumes to be sure they are in the
library and maybe set them to READONLY and then run an audit on them to
see if there really are damaged files there.
Etienne Brodeur
Serti Informatique
Stephan Dinelle <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
04/13/2004 10:24 AM
Please respond to
"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To
[EMAIL PROTECTED]
cc
Subject
Re: No match found...
Here is the result of the Q VOL ACC=UNAVAIL command
Tivoli Storage Manager
Command Line Administrative Interface - Version 4, Release 2, Level 1.0
ANS8000I Server command: 'q vol acc=unavail'
Volume Name Storage Device Estimated Pct Volume
Pool Name Class Name Capacity Util Status
(MB)
------------------------ ----------- ---------- --------- -----
--------
099ACYL1 ARCHIVEPOOL LTOCLASS 141,962.7 100.0 Full
101ACYL1 OFFPOOL LTOCLASSO- 190,734.0 4.4
Filling
FF
104ACYL1 OFFPOOL LTOCLASSO- 190,734.0 1.1
Filling
FF
139ACYL1 TAPEPOOL LTOCLASS 190,734.0 0.7
Filling
142ACYL1 TAPEPOOL LTOCLASS 162,534.4 5.7 Full
147ACYL1 TAPEPOOL LTOCLASS 190,734.0 0.4
Filling
162ACYL1 OFFPOOL LTOCLASSO- 190,734.0 18.2
Filling
FF
175ACYL1 ARCHIVESPE- LTOCLASS 190,734.0 6.4
Filling
CIAL
ANS8002I Highest return code was 0.
Bill Boyer <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
2004-04-13 10:06
Please respond to "ADSM: Dist Stor Manager"
To: [EMAIL PROTECTED]
cc:
Subject: Re: No match found...
Are you reclamation tasks completing successfully? Also, did anyone change
the reuse delay of the OFFPOOL storage pool? Are the tapes in a PENDING
state?
I would check to make sure your reclamation tasks are running to
completion.
Maybe check to see if you have any onsite tapes that are unavailable? Q
VOL
ACC=UNAVAIL. That would explain why reclamation wasn't completing.
Bill Boyer
DSS, Inc.
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of
Stephan Dinelle
Sent: Tuesday, April 13, 2004 9:31 AM
To: [EMAIL PROTECTED]
Subject: No match found...
Hi,
It will be almost 2 weeks now that our TSM server (version 5, release 1,
Level 6.4 for Windows) do not retrieving any "storage=offpool,
access=offsite"...
We normally had an average of 1 to 2 tapes every day that were returning
from the offsite storage.
Here is the command:
q vol stg=offpool access=offsite status=empty
Nothing was changed or modified for the last 6 months.
Any clue(s) where to check and what to check?
N.B. IBM Tape library 3583
Thanks
