Hi, Couple of things could be causing this. Most likely, the tape isn't available in the by TSM mentioned slot.
- Slot 10 of a STK L700 Library is the upper import/export slot of this bulk station. Is the tape placed in this slot, or is it placed any other slot? Regards, Karel -----Oorspronkelijk bericht----- Van: Jones, Kelli [mailto:[EMAIL PROTECTED] Verzonden: woensdag 10 maart 2004 17:14 Aan: [EMAIL PROTECTED] Onderwerp: LTO Tape Question TSM 5.1.7.0 AIX 5.0 STK L700 Library IBM LTO Drives I have a volume (000005) that is giving me a fit! Somehow, during library servicing ( I think), volume was removed from library. The volume contains a small amount of data, but contains data none the less. There are no read or write errors. However, when I attempt to check it back in (I have used the search=bulk command, I have named the volume, etc, etc) it fails with an ANR8942E. The message sometimes states: 'Cannot move volume NOT KNOWN from slot 10 (cap) to clot XXX' - (the slot # varies) but it also sometimes says: 'Cannot move volume 000005 from slot 10 to slot XXX'. I have run audits and I have tried labeling it (overwrite=no), I have tried moving the data (which fails because it needs the volume to be checked in and it can't be checked in!) Of course, auditing the volume doesn't work for the same reason. I am probably missing something very simple I'm sure but I just can't put my finger on it...any help would be appreciated. Thanks! Kelli Chesterfield County [EMAIL PROTECTED] 804-748-1951
