If the drives are all experiencing hardware problems, I had an instance like this that was driving me nuts..
On unload, one failing drive was not putting the leader back into the tape all the way, but leaving it hang a bit. The tape was ejected enough for the robot to go put it away. The drive would eventually error out, and as the tapes were called for in other drives, the bad tapes that had been put away, were getting eaten by all the other drives! As bad tapes propagated around, all 11 of my drives went offline in a few short hours. Drove the CE out of his mind, until he found the 'one' drive that was causing the problems. If you are getting load errors on all your drives, check the library for tapes with leaders hanging, then go for the first drive that broke. my 2.567 cents. bob On Tue, Feb 10, 2004 at 10:53:18PM -0600, French, Michael wrote: > One of my TSM servers has drives continously going offline over the past few days. > I have 2 servers attached to the same library, server 1 is fine, server 2 keeps > getting drive failures. On Sunday, all 4 drives went down within hours of each > other! This strikes me as suspecious, I see this sort of message in the system logs:
