Thanks for the response. So, if I don't have any LTO2 media, I can just leave the mountlimit set to DRIVES? But you're saying that TSM will use the LTO1 drives until they are all utilized before using an LTO2 drive?
-----Original Message----- From: Volker Reinen [mailto:[EMAIL PROTECTED] Sent: Friday, February 06, 2004 3:44 AM To: [EMAIL PROTECTED] Subject: LTO1 and LTO2 drives in a 3584 Moin Kevin, This week we added two LTO2 drive into an Frame with four LTO1 Drives. It works. We changes the devc in the way you describe it. In the LTO1 Devclass we changes also the parameter mountlimit to "numbers of LTO1 + half of LTO2" => 5. So we have one LTO2 drive for LTO2 Media. The recommodation from IBM is this formular or mounlimit = numbers of LTO1 because TSM uses for LTO1 Media the LTO1 Drives first. We added a second devc with format=ultrium2c for stgpools with LTO2 Media. Mit freundlichen Gruessen - Best regards Volker Reinen Enterprise Computing Solutions CC CompuNet AG & Co. oHG A part of Computacenter plc Severinstrasse 42, 45127 Essen, Germany Phone: +49-(0)201-2012-650, Fax: +49-(0)201-2012-217, Mobile: +49-(0)173-3507643 E-Mail : [EMAIL PROTECTED] Visit us on the Internet: http://www.computacenter.com Visit our Online-Shop: http://www.compunet.de/connect This email is confidential. If you are not the intended recipient, you must not disclose or use the information contained in it. If you have received this mail in error, please tell us immediately by return email and delete the document.
