Have those new scratch tapes been labelled? -Lloyd
On Wed, 10 Dec 2003 23:15:34 +0100 brian welsh <[EMAIL PROTECTED]> wrote thusly: > Hello, > > TSM 5.1.7 on AIX 5.1, Library 3494 and 4x 3590 H-drives FC-attached. > > We are in the process of taking into production 4 new 3590 H-drives. We > were using E-drives. > > Last weekend we set all the tape (1100) to read-only status, and > check-in some new scratches (using collocation). Now we need to move > data as soon as possible. > > When we start move data with a tape written on an E-drive, it moves the > data to a scratch volume. So far so good, but when the scratch tape is > defined in an storage pool we see the message anr8359, Media fault > detected and status is changed again to read-only. > > Is this normal, and/or do we have to run some other commands on the > tape? > > Two years ago we were in the same process from B-drives to E-drives, and > have no trouble at all. > > Thanx, > > Brian. > > _________________________________________________________________ > MSN Zoeken helpt je om de gekste dingen te vinden! http://search.msn.nl > -- ----------------------------------------------------------------- Lloyd Dieter - Senior Technology Consultant Registered Linux User 285528 Synergy, Inc. http://www.synergyinc.cc [EMAIL PROTECTED] Main:585-389-1260 fax:585-389-1267 -----------------------------------------------------------------
