the recovery cell is that ~upper left~ cell that you refer to the CE tape cell is in that same column but the bottom cell or ~lower left~ you might say...
those are the only two I know of that you can't access for general use Dwight "Thomas Rupp, Vorarlberger To: [EMAIL PROTECTED] Illwerke AG" cc: <[EMAIL PROTECTED] Subject: Number of usable cells in a 3494 ERKE.AT> Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED] .EDU> 12/08/2003 10:43 AM Please respond to "ADSM: Dist Stor Manager" Hi TSM-ers, I'm running TSM 4.2.2.8 on a NSM with a 3494 library with 210 cells (counted by myself). mtlib -l /dev/lmcp0 -qL only reports 206 cells number of cells............206 available cells............0 In the library I find one CE and two cleaning cartridges. mtlib -l /dev/lmcp0 -vqK -s fff6 shows number of volumes....1 mtlib -l /dev/lmcp0 -vqK -s fffd shows number of volumes....2 One of this 4 "missing" cells is the special cell in the upper left corner but how about the remaining 3 cells? How can I use this cells? Could the CE and cleaning cartridges be counted twice by the 3494? I never had much to do with the 3494 so the solution to this "problem" might be quite obvious. Thanks and kind regards Thomas Rupp