Thank you very much.. for your reply.
Today is started to build the config and hope to finish it on friday.
TSM server at the branche office (TSM2) with a 1 mb WAN connection to the TSM server at HQ (TSM1).
Doing db backups from TSM2 to virtual volumes at TSM1 server over the WAN.
In HQ I can restore the TSM2 db on the same LPAR as the TSM1 server from this virtual volume and so creating a second TSM instance on this LPAR
This instance will check in copypool volumes via a shared library of the TSM1 server.
Something like:
checkin libvol sharedlib stat=privat owner "TSM2"
And so we come to a working solution ..I geuss.
Best regards,
Koen
From: Bill Smoldt <[EMAIL PROTECTED]> Reply-To: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Subject: Re: ! using drm with a shared library. Date: Sat, 20 Sep 2003 09:07:32 -0600
Koen,
The answer is yes, you can do what you want. Library partitioning may be easier, however, depending on your configuration.
What do you plan to do with the restored server after the move? If you are going to access data tapes for the branch database at HQ, are there any cartridges with duplicate barcode labels? If you're using HQ as a DR site, do any of the copypool tapes from Branch have the same cartridge labels?
The easiest method I can think of, if you have WAN access between the two, is to set up virtual volumes on the HQ for the Branch, do a database backup over the network, move your volhist and devconfig to HQ, and do the restore.
If you don't have WAN connection, you're going to have to set up the shared library on HQ and edit the Branch devconfig file before doing your restore - that will take some work.
Bill Smoldt STORServer, Inc.
-----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of Koen Willems Sent: Saturday, September 20, 2003 5:37 AM To: [EMAIL PROTECTED] Subject: ! using drm with a shared library.
Dear listers,
I am setting up the following config:
HQ:
1 3584 with 9 fibre drives 2 AIX tsm servers on 1 690 lpar with disk and tape on 2109-f16 switches and ess tdp for sap
Brache office: 1 tsm server on a remote location. 1 AIX tsm server with disk and tape on 2109-f16 switches and ess tdp for sap
I would like to:
Restore the tsm server of the remote location on the second TSM instance at HQ in bij using library sharing instead of making a logical partition in the 3584.
Question:
Kan I us the second tsm instance to restore the branche office tsm server via "dsmserv restore db -k ....." using the shared library managed by the main tsm server in HQ. or am i obliged to use hardware partitioning of the 3584 ....
THNX in advance,
Koen Willems
_________________________________________________________________ Add photos to your e-mail with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail
_________________________________________________________________ The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/junkmail