Hi Dave Thanks for your input, our setup is quite similarly...
Only difference are: - I have followed Jims idea, copying the dsmcad to dsmcadr1 for resource 1 and so one! - Furthermore I use the PASSWORDDIR option in my DSM.OPT Have you restored your cluster without having the trouble I have had... or have you been lucky, and by accident avoiding any migrations/databasebackups? Regards Flemming -----Oprindelig meddelelse----- Fra: Marsh, David [mailto:[EMAIL PROTECTED] Sendt: 23. juli 2003 19:53 Til: [EMAIL PROTECTED] Emne: Re: Restore of a NetWare Cluster... what's happening? I'm coming into this kind of late, but here is a copy of the configuration I use to configure all of my NetWare clusters. With regards, Dave Marsh Scottsdale Healthcare Information Services 480.675.4395 -----Original Message----- From: Flemming Hougaard [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 16, 2003 4:46 AM To: [EMAIL PROTECTED] Subject: Restore of a NetWare Cluster... what's happening? Hi all I've been restoring some data on a NetWare Cluster... and I have had several problems doing this: The TSM Server is a 5.1.6.2 on a AIX 4.3.3. Client software, NetWare 6, SP3 and TSM Client 5.1.6.0. Problem: Every time I tried to start a restore on the cluster, the following happened: - Client went to MediaWait (but no media was mounted) - Client went to Run (still no media mounted) - Client went to Receivewait, and after 600 sec. the server disconnects the server: Logs: On server: ANR0481W Session 49492 for node <NODENAME> (NetWare)terminated - client did not respond within 300 seconds. On Client: ANS1005E TCP/IP read error on socket = 11, errno = 54, reason : 'Connection reset by peer'. The scary thing is, if I made a restore of a filespace from the SYS: volume (not backed up as a cluster), then it all worked fine!! Solution: Stop all migration and databasebackups - and all works fine!!! What's happening?? is it a designfailure... or is it working as planned? It cannot be true you can't make a restore on a NetWare Cluster, and a migration and/or a databasebackup at the same time. I have tried to reproduce the failure... and everytime I start to migrate or make a databasebackup - the restore fails!! What's happening??? Regards Flemming
