Anderson/Group - # lsdev -Cc tape rmt0 Available 1P-08-00-0,0 4.0 GB 4mm Tape Drive rmt1 Available 1P-08-00-2,0 4.0 GB 4mm Tape Drive smc0 Available 1P-08-00-3,0 IBM 7336 Tape Medium Changer # lsdev -Cc adsmtape mt0 Available 1P-08-00-0,0 Tivoli Storage Manager Tape Drive mt1 Available 1P-08-00-2,0 Tivoli Storage Manager Tape Drive # I used the Webgui to define the library. But nowhere on that panel does it ask for any scsi ID or anything. Just a Library name and if it's shared or not.
Thanks again everyone. Scott They show up here.. But when I try to install the Quoting "Anderson F. Nobre" <[EMAIL PROTECTED]>: > Scott, > > Are you using the TSM SCSI Device Driver? > If yes, what's the target and LUN that you are using to define the library > device? > Can you type the following commands and show us the output? > # lsdev -Cc tape > # lsdev -Cc adsmtape > > Regards, > > Anderson > > ----- Original Message ----- > From: "Scott Figgins" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, June 23, 2003 12:46 AM > Subject: oops forgot the error message. > > > I'm getting this error in my Server log on AIX 5.1 with TSM 5.1.6.5 after > defining a 7336-205 4mm Tape library. Any ideas? IBM says this library is > supported in the BASE codeset. > > 06/22/03 22:54:26 ANR8843E Initialization failed for SCSI library > AUTOLIB1 - > the library will be inaccessible. > 06/22/03 22:54:26 ANR8441E Initialization failed for SCSI library > AUTOLIB1. > > > > Any help is appreciated. > Scott Figgins > IBM Cate > [EMAIL PROTECTED] > > ------------------------------------------------- > This mail sent through IMP: http://horde.org/imp/ > ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/
