You do not say is the reclamation performed on primary or copy pool,
collocated or non-collocated, how many source volumes were mounted.
For example reclamation of non-collocated copypool volume reading from
collocated primary pool volumes may require a lot of mounts. And DLT7000
mount time is now so small.
Zlatko Krastev
IT Consultant
Eddie Jones <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
09.05.2003 16:28
Please respond to "ADSM: Dist Stor Manager"
To: [EMAIL PROTECTED]
cc:
Subject: slow moving data from tape to tape
Another tape question. We are running TSM 5.1.6.3 on nt 4.0 sp6a. I also
have 35/70 dlt libraries. When I reclaim data and it goes from tape to
tape some tapes are very slow. Example: A 98% reclaimable tape can take
me
2 hours to reclaim where as the next tape which might be 92% reclaimable
may take 30 minutes. Also I migrated 16gb of data from my onsite tapepool
to my offsite tape pool. I was using one process. Should I look at my
hardware or is there something wrong with some of the tapes. Any help on
this would be appreciated.
Eddie Jones
770-953-1959 ext.2824
"The greatest lesson in life is to know that even fools are right
sometimes."
- Sir Winston Spencer Churchill
---***---
