Thanks for your help Del.
We have tested with 4 stripes and we restored at around 28-31MB/sec
previously from tape (3590E XL).
I'll call IBM.
Thanks again.
Rizwan
________________________________
Rizwan Shamim
Central Backup Service (CBS)
Merrill Lynch Europe PLC
Tel: 020 7995 1176
Mobile: 0787 625 8246
mailto:[EMAIL PROTECTED]
For very important information relating to this e-mail please click on
this link: http://www.ml.com/legal_info.htm
> -----Original Message-----
> From: Del Hoobler [SMTP:[EMAIL PROTECTED]
> Sent: Monday, February 24, 2003 2:51 PM
> To: [EMAIL PROTECTED]
> Subject: Re: FW: TDP SQL Restore Error
>
> Rizwan,
>
> This means that some of the data objects needed for the restore
> cannot be found in the TSM Server database. If the restore
> worked prior to the migration to tape, the backup must
> have been good. And so, something must have happened
> that caused some of those objects to be deleted or corrupted.
> (for example, a bad tape, etc.)
>
> If you are trying to get this process working, I would
> start with a single stripe backup, let it migrate to tape,
> and then try the restore. Make sure it works with
> a single stripe to verify the procedure, then increase
> the stripes to make sure your setup is correct.
>
> If you continue to have problems, please call IBM support.
> Deleted objects are serious business and indicate
> that something else is going wrong with your TSM Server.
>
> Thanks,
>
> Del
>
> ----------------------------------------------------
>
> Del Hoobler
> IBM Corporation
> [EMAIL PROTECTED]
>
> - Remember that the best job security is
> doing a job well and doing it cheerfully.
>
> > 24-02-2003 13:23:50 ACO5456W The backup is corrupt and is not fully
> > restorable.
> >
> > I'm talk to my SQL DBA tells me that the test restore worked before the
> > data was migrated to tape.
> >
