The typical cause is the tapes were not labeled. You checked them in, but you should have done a LABEL LIBVOLUME ...... CHECKIN=Scratch. Just check them back out and do the LABEL command.
This is the normal action TSM takes to get a bad tape marked for no reuse when it is not labeled. Paul D. Seay, Jr. Technical Specialist Northrop Grumman Information Technology 757-688-8180 -----Original Message----- From: Bengani, Thabani [mailto:[EMAIL PROTECTED]] Sent: Wednesday, January 29, 2003 5:24 AM To: [EMAIL PROTECTED] Subject: Tape status Hi Tsmers, I have a problem with my tapes in the LTO 3583 library. I checked in three scratch tapes for my weekly backup schedule and they are now marked private. The problem is, there is no data in these tapes they are empty. Anyone who has had this before or know the solution to it. Thank you in advance. Thabani Bengani Property & Asset Finance - IT Nedbank Corporate Ext. 364 2113 Cell. 0825716778 [EMAIL PROTECTED] The contents of this email message and any attachments relating to the official business of Nedbank Limited ("Nedbank") are proprietary to Nedbank. They are confidential, legally privileged and protected by law. Nedbank does not own nor endorse any other contents. Views and opinions are those of the sender and do not represent Nedbank's views and opinions nor constitute any commitment by or obligation on Nedbank unless otherwise stated or agreed to in writing by Nedbank. The person addressed in this email message is the sole authorised recipient. Please notify the sender immediately if it has unintentionally reached you and do not read, disclose or use the contents in any way. Nedbank cannot assure that the integrity of this communication has been maintained, nor that it is free of errors, viruses, interception or interference. Nedbank, therefore, does not accept liability or legal responsibility for the contents of this email message or its effect on electronic devices.
