Hi, Thanks for the info .I really appreciate this info.But with the same cable NT is working. Then how is this possible?
Balanand Pinni -----Original Message----- From: Levinson, Donald A. [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 30, 2003 1:39 PM To: 'ADSM: Dist Stor Manager'; PINNI, BALANAND (SBCSI) Subject: RE: Question on Gigabit SX 10/100/1000T Gigabit uses all 4 pairs so to cross it over you cannot use a standard CAT5(e) crossover cable that only crosses two pairs. -----Original Message----- From: PINNI, BALANAND (SBCSI) [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 30, 2003 10:04 AM To: [EMAIL PROTECTED] Subject: Question on Gigabit SX 10/100/1000T All- Please help me with this issue. I am trying to connect p-630 AIX5L IGB Ethernet 10/100/1000Base T SX Card with upto date driver at *.*.*.35 to one of the Filer (Unix/nt) for NETAPP Storage. But when I connect using cross over cat5e cable light on NIC card on both ends show as 1000 Mbps .I have kept in autoneg and other end is 1000 fdx Autoneg. But I cant ping to each other .My TSM volumes are on NFS Netapp disk which work with 100mbps with same card but not autoneg of 1000Mbps. Netapp side NIC works at 1000mbps with another Nt unit. What am I missing? Please help .I have worked on Fibre it works .But this is UTP . What could go wrong on my side? Thanks I advance . Balanand Pinni This transmittal may contain confidential information intended solely for the addressee. If you are not the intended recipient, you are hereby notified that you have received this transmittal in error; any review, dissemination, distribution or copying of this transmittal is strictly prohibited. If you have received this communication in error, please notify us immediately by reply or by telephone (collect at 907-564-1000) and ask to speak with the message sender. In addition, please immediately delete this message and all attachments. Thank you.
