Hi, Take a look of TSM Device support in IBM support site (you have to be registered to have full access). I think you are not using the element numbers defined for your type of library. I have found the following in IBM support site for ADIC 1000 library. Tape drive 1 (element 800) __________ Tape drive 2 (element 801) __________ Tape drive 3 (element 802) __________ Tape drive 4 (element 803) __________ Tape drive 5 (element 804) __________ Tape drive 6 (element 805) __________ Tape drive 7 (element 806) __________ Tape drive 8 (element 807) __________ Tape drive 9 (element 808) __________ Tape drive 10 (element 809) __________ Tape drive 11 (element 810) __________ Tape drive 12 (element 811) __________
Hopes this helps, Rafael ------- to: fenglimian <[EMAIL PROTECTED]> cc: date: 1/9/2003 1:49:57 AM subject: =?GB2312?Q?help=A3=BAdefine automated drive question?= > Hi all#: > Today I tried to configure a TSM server!#My lib is ADIC scalar 1000 and has two >driver#(the elements are 1200#,1201#,I had already made the two drives as TSM >tape#,devices name are /dev/mt0!"/dev/mt1#)#,after I had defined my autolib#,then I >tried to define the drives#,everytime I used the follow options: > library name :libname > drive name:drv1 > device:/dev/mt0 > element:1200 > the output is:Invalid value for ELEMENT parameter.About five months ago,I had done >the same thing ,every thing is sucessful,what's the problem? > > > !!!!!!!!!!!!!!!!fenglimian > [EMAIL PROTECTED] > !!!!!!!!!!!!!!!!!!!!2003-01-09 > _______________________________________________________________________________________________________ Obtin gratis tu cuenta de correo en StarMedia Email. !Regmstrate hoy mismo!. http://www.starmedia.com/email
