There is an APAR for this Problem:
APAR= IC34020
DEFINE DRIVE AND DEFINE PATH COMMANDS NOT NEEDED WHEN SETTING
UP TSM LIBRARY CLIENT COMMUNICATIONS TO THE TSM LIBRARY MANAGER.
ERROR DESCRIPTION:
When setting up the TSM library client server, TSM Administrator
Guide v5.1 documentation currently states to do the following:
6. Define the drives in the library.
define drive sangroupdrivea element=1030
define drive sangroupdriveb element=1031
7. Define the path from the server to each of the drives.
define path astro drivea srctype=server desttype=drive
library=sangroup device=mt0.1.0.2
define path astro driveb srctype=server desttype=drive
library=sangroup device=mt0.2.0.2
.
As of TSM 5.1 server, it is no longer required to do the above
steps as part of a TSM library client server install. These
steps can be skipped as part of the TSM library client setup,
and the next step taken (define the device class for the TSM
library client server).
.
Documentation needs to be updated to reflect the changes in
TSM library client server setup.
LOCAL FIX:
PROBLEM SUMMARY:
PROBLEM CONCLUSION:
TEMPORARY FIX:
COMMENTS:
TSM Admin Guide across all applicable platforms - version 5.1
info available in 5.1.5 doc release for Linux and all other
platforms refreshed for next release (v 6.1)
Information changed as requested (deleted two incorrect steps
in configuring library client server)
Mario Strehlow
System Consultant
-------------------------------------------------------------
COMPAREX Informationssysteme GmbH
Geschäftsstelle West
Kohlstraße 51
42109 Wuppertal
Tel: +49 (202) 7598-269
Fax: +49 (202) 7598-110
Mobil: +49 (171) 8 637 424
E-Mail: [EMAIL PROTECTED]
-------------------------------------------------------------
